Brackets and mounts
HUD Projector Dash Mount (35 deg Wedge Tray)
- Bounding box
- 94.0 × 49.0 × 96.8 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- September 22, 2026
Download
Free to download and use. See the terms.
The prompt
An engineering solid 3D model (STEP/STL) of a HUD projector dashboard mount for a car with a 35-degree tilted windshield dash. The model consists of an integrated single-body wedge and an enclosed rectangular storage compartment tray. Internal compartment dimensions for the device enclosure must be precisely: length 90mm, width 45mm, and interior depth 15mm (including 1mm clearance/tolerance for plastic shrinkage). Wall thickness of the enclosure is 2mm. The bottom base of the model is a solid flat wedge angled at exactly 35 degrees to level the top device horizontally. The rear wall facing the driver must feature an extended vertical anti-glare sunshade hood visor, rising 12mm higher than the side walls (total rear wall height 27mm) to completely block direct LED light from blinding the driver's eyes. Front wall facing the windshield is 15mm high. Include a 6mm circular wire routing pass-through hole for the OBD/GPS power cable centered on the lower edge of the left side wall. The entire design must be optimized for FDM 3D printing without overhanging structures requiring excessive supports. No artistic surfaces, strict geometric and mechanical tolerances in millimeters.
Parameters
| Name | Value | Range |
|---|---|---|
| Bay Interior Length | 90 mm | 40 – 200 |
| Bay Interior Width | 45 mm | 20 – 120 |
| Bay Interior Depth | 15 mm | 5 – 60 |
| Wall Thickness | 2 mm | 1.2 – 5 |
| Front / Side Wall Height | 15 mm | 5 – 60 |
| Rear Wall Height (Hood) | 27 mm | 5 – 90 |
| Base Wedge Angle | 35 deg | 0 – 60 |
| Wedge Thickness at Front Edge | 4 mm | 2 – 20 |
| Cable Pass-Through Dia | 6 mm | 2 – 20 |
| Cable Hole Axis Height | 5 mm | 3 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu