Gears and transmission
HTD 5mm 42T Two-Piece Timing Pulley
- Bounding box
- 74.2 × 74.2 × 21.6 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- October 23, 2026
Download
Free to download and use. See the terms.
The prompt
Belt Profile: 5 mm pitch HTD timing belt, 15 mm wide Bolt Pattern: 0.20 in. diameter holes, evenly spaced on a 1.875 in. diameter bolt circle Bore: 0.95 in. diameter through hole, with two 1.125 in. diameter bearing pockets Flange Diameter: 2.92 in. Material: Black Polycarbonate Outside Diameter: 2.575 in. (at outer tooth edge) Pitch Diameter: 2.632 in. Teeth: 42 Weight: 0.12 lbs. Width: 0.85 in. (both halves assembled together)
Parameters
| Name | Value | Range |
|---|---|---|
| Tooth Count | 42 teeth | 20 – 72 |
| Belt Pitch | 5 mm | 3 – 10 |
| Outside Diameter | 65.41 mm | 40 – 120 |
| Belt Width (Toothed Band) | 15 mm | 6 – 30 |
| Flange Diameter | 74.17 mm | 45 – 140 |
| Half Axial Thickness | 10.8 mm | 6 – 25 |
| Through Bore | 24.13 mm | 6 – 50 |
| Bearing Pocket Diameter | 28.58 mm | 8 – 60 |
| Bearing Pocket Depth | 5 mm | 0.5 – 20 |
| Bolt Hole Diameter | 5.08 mm | 2 – 12 |
| Bolt Circle Diameter | 47.63 mm | 20 – 100 |
| Bolt Count | 4 holes | 2 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled