Everything else
HR executive office
- Bounding box
- 5636 × 5332 × 2843 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
okay i am assigned to make a 3D drawing of head hr executive office on 5th floor of head office at a bank, the dimensions of the office are 18' x 17' . the front partition is to be done with glass , keeping door at the right side means 18' front , the back wall is already there the left side wall will be done from gypsum partition, the right side wall is existing gypsum partition which will be moved to 1.5' left side to align with pillar edge. show wooden flooring inside the office and tv on the front glass and office executive chair in center and side table touched with executive table
Parameters
| Name | Value | Range |
|---|---|---|
| Room/frontage width (18 ft = 5486) | 5486 mm | 3000 – 10000 |
| Room depth (17 ft = 5182) | 5182 mm | 3000 – 10000 |
| Right wall setback from right edge (1.5 ft = 457) | 457 mm | 0 – 2000 |
| Wall thickness | 150 mm | 100 – 300 |
| Wall height (9 ft = 2743) | 2743 mm | 2000 – 4000 |
| Floor slab thickness | 100 mm | 50 – 200 |
| Door width (3 ft = 914) | 914 mm | 700 – 1200 |
| Door height (7 ft = 2134) | 2134 mm | 2000 – 2500 |
| Door distance from right front edge | 500 mm | 300 – 1000 |
| Executive desk width | 1800 mm | 1200 – 2400 |
| Executive desk depth | 900 mm | 600 – 1200 |
| Desk height | 750 mm | 650 – 900 |
| Side table width | 600 mm | 400 – 900 |
| Side table depth | 900 mm | 400 – 1200 |
| Chair seat height | 480 mm | 400 – 600 |
| Chair back height | 900 mm | 600 – 1200 |
| TV screen width | 1200 mm | 600 – 2000 |
| TV screen height | 700 mm | 400 – 1200 |
| TV bottom height from floor top | 1100 mm | 800 – 1800 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm