Brackets and mounts
Hot Wheels Drift Pad Enclosure (3 Parts)
- Bounding box
- 885.0 × 275.0 × 96.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
Create a precise 3D-printable rectangular enclosure for a Hot Wheels drift pad. Overall size: **300 × 200 × 100 mm**. Make the enclosure hollow with **4 mm walls** and a **4 mm bottom**. Create a separate removable **300 × 200 × 4 mm top plate**, secured with M3 screws and corner screw bosses. Inside the enclosure, add a vertical mount for a small DC motor with its shaft pointing upward. Create a separate **150 mm diameter × 5 mm thick circular disc** mounted horizontally on the motor shaft. Add a reinforced **central hub/hole** for attaching the disc to the motor shaft. The disc must rotate freely underneath the removable top plate with sufficient clearance. Leave open space inside for electronics, battery and wiring. Create **three separate printable parts: bottom enclosure, top plate, and 150 mm rotating disc**. Keep all dimensions accurate, editable and suitable for FDM 3D printing. Do not create an artistic mesh.
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Length (X) | 300 mm | 150 – 500 |
| Enclosure Width (Y) | 200 mm | 100 – 400 |
| Enclosure Height (Z) | 96 mm | 30 – 200 |
| Wall Thickness | 4 mm | 2 – 8 |
| Floor Thickness | 4 mm | 2 – 8 |
| Corner Boss OD | 8 mm | 5 – 16 |
| Boss M3 Pilot Hole | 3.2 mm | 2 – 6 |
| Boss Centre Inset From Corner | 7 mm | 5 – 30 |
| Cable Pass-Through Hole | 12 mm | 3 – 30 |
| Motor Cradle Square Size | 30 mm | 20 – 80 |
| Motor Cradle Height | 40 mm | 15 – 90 |
| Motor Bore Diameter | 24 mm | 10 – 60 |
| Motor Bore Depth (from top) | 30 mm | 5 – 80 |
| Clamp Screw Hole | 3.2 mm | 2 – 6 |
| Top Plate Thickness | 4 mm | 2 – 10 |
| M3 Clearance Hole | 3.4 mm | 2.5 – 8 |
| Disc Diameter | 150 mm | 50 – 185 |
| Disc Thickness | 5 mm | 2 – 15 |
| Hub OD | 25 mm | 10 – 80 |
| Hub Height (under disc) | 10 mm | 3 – 40 |
| Motor Shaft Bore | 5 mm | 2 – 30 |
| M3 Set-Screw Tap Hole | 2.5 mm | 1.5 – 6 |
| Hub-to-Disc Fillet | 1.5 mm | 0.5 – 4 |
| Exploded Layout Gap | 30 mm | 5 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu