Brackets and mounts
Hospital Assistance Robot (Exploded)
- Bounding box
- 2852 × 336 × 140 mm
- Engine
- 3D Printing B-rep
- Parameters
- 10
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Design a compact, two-wheel differential-drive Hospital Assistance Robot for indoor use. The robot must have two operating modes: 1. Cleaning Mode: Integrated vacuum cleaner with suction inlet and removable dust collection box. Vacuum operates only in cleaning mode. 2. Transport Mode: Upper storage compartment with a removable tray for carrying medicines and medical equipment to different hospital rooms. Mechanical design requirements: - Rectangular chassis with two powered side wheels and one caster support wheel. - Two downward-facing IR sensor mounts, one on the left and one on the right, at the front underside for line following. - Arduino, motor driver, battery and wiring mounting compartments. - Separate vacuum motor housing and dust collection chamber. - Upper medicine/equipment storage compartment with protective edges. - Compact, stable, modular construction with rounded edges. - Accessible electronics enclosure and ventilation openings. Use preliminary dimensions of approximately 400 × 320 × 400 mm. Generate a complete 3D CAD assembly with individual components, exploded view, front view, side view, top view and isometric view. Use realistic mechanical proportions and make the design suitable for CATIA refinement and 3D printing.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis length | 400 mm | 250 – 600 |
| Chassis width | 320 mm | 200 – 500 |
| Chassis height | 120 mm | 60 – 250 |
| Upper compartment height | 140 mm | 60 – 250 |
| Wall thickness | 5 mm | 2 – 10 |
| Floor thickness | 8 mm | 3 – 20 |
| Drive wheel diameter | 100 mm | 40 – 200 |
| Drive wheel width | 30 mm | 10 – 80 |
| Caster wheel diameter | 50 mm | 20 – 100 |
| Exploded layout gap | 40 mm | 10 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Hydraulic Wing and Flaperon Demonstrator
Create a parametric 3D CAD model of a hydraulic aircraft wing and movable flaperon based on the reference sketch. **Wing dimensions:** - 240 mm chord, 120 mm span, 48 mm thickness
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
