Gears and transmission
Horizontal paddle mixer - side-view reconstruction
- Bounding box
- 4185.7 × 666.0 × 1369.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
Editable 3D representation of the uploaded side elevation; maintain the marked 500 mm clearance beneath the support-frame rail. Include cylindrical removable housing, top rectangular feed lid, discharge below right end, central paddle rotor, drive motor/gearbox, shaft bearings and steel support frame. Dimensions not shown are approximate.
Parameters
| Name | Value | Range |
|---|---|---|
| Mixer housing length | 3100 mm | 1800 – 5200 |
| Mixer housing diameter | 550 mm | 350 – 1000 |
| Shell wall thickness | 8 mm | 4 – 16 |
| Height beneath frame (500 in drawing) | 500 mm | 350 – 1200 |
| Stand overall width | 660 mm | 500 – 1100 |
| Top inlet length | 850 mm | 450 – 1300 |
| Top inlet width | 360 mm | 240 – 440 |
| Inlet height above barrel | 180 mm | 100 – 360 |
| Discharge opening length | 380 mm | 260 – 600 |
| Motor housing length | 320 mm | 240 – 520 |
| Motor diameter | 370 mm | 260 – 460 |
| Rotating shaft diameter | 65 mm | 45 – 100 |
| Paddle stations | 11 count | 7 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled