Brackets and mounts
Hopper Assembly with Lid and Screens
- Bounding box
- 892.3 × 892.3 × 1261.3 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
I want to design a 100kg hopper where I wil put in 2 different mesh sizes on top for caustic loading into the following screw conveyor,the hopper must be stainless with a removable lid:Based on the technical drawing for the TXS3L200Q screw feeder, the following dimensions are relevant for designing and mounting a hopper to the inlet: * **Inlet Model**: XKFL2501. * **Inlet Internal Diameter**: 273 mm. * **Mounting Flange Outer Diameter**: 365 mm. * **Bolt Circle Diameter (BCD)**: 335 mm. * **Bolt Hole Specifications**: There are 8 mounting holes, each with a diameter of 19 mm. * **Inlet Vertical Position**: The center of the inlet is located 777 mm horizontally from the back of the drive unit assembly. * **Inlet Height**: The top of the inlet flange is 180 mm above the centerline of the screw tube. * **Conveyor Inclination**: The unit is designed to operate at a 30° angle, which must be accounted for in the hopper's discharge geometry to ensure a proper seal with the horizontal inlet flange.
Parameters
| Name | Value | Range |
|---|---|---|
| Top Square Side | 800 mm | 500 – 1200 |
| Straight Height | 700 mm | 500 – 1200 |
| Cone Height | 500 mm | 300 – 800 |
| Outlet Diameter | 273 mm | 200 – 400 |
| Flange Outer Diameter | 365 mm | 300 – 500 |
| Flange Thickness | 10 mm | 5 – 20 |
| Bolt Hole Diameter | 19 mm | 10 – 30 |
| Bolt Circle Diameter | 335 mm | 300 – 450 |
| Number of Bolts | 8 | 4 – 12 |
| Gasket Thickness | 3 mm | 1 – 10 |
| Lid Side Length | 860 mm | 800 – 1000 |
| Lid Thickness | 3 mm | 1 – 6 |
| Screen Cutout Size | 420 mm | 300 – 500 |
| Cutout Horizontal Offset | 210 mm | 100 – 400 |
| Screen Inner Opening | 380 mm | 300 – 500 |
| Screen Frame Thickness | 3 mm | 1 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent