Hollow Sensor Prism 50x40x15

1 views

Bounding box: 50 × 40 × 15 mm
Engine: 3D Printing B-rep
Parameters: 21
Published: November 6, 2026

Download

Free to download and use. See the terms.

The prompt

bro please design a rectangular prism for me with dimensions 50*40*15, with a hollow center. Include a space or a sensor-to be used for the electrical input-as well as openings for cables.

Parameters

Name	Value	Range
Outer length / X	50 mm	20 – 200
Outer width / Y	40 mm	20 – 200
Outer height / Z	15 mm	5 – 100
Edge rounding	1 mm	0 – 2.5
Wall thickness	2 mm	1.2 – 5
Floor thickness	2 mm	1.2 – 5
Window width	20 mm	5 – 40
Window height	9 mm	3 – 30
Window centre height	7.5 mm	3 – 14
Outer sensor recess depth	0.8 mm	0 – 1.2
Recess border around window	3 mm	1 – 8
Round cable hole diameter	6 mm	2 – 20
Round cable hole centre height	6 mm	2 – 14
Cable slot width	4 mm	1.5 – 15
Cable slot height	8 mm	3 – 20
Cable slot centre height	7 mm	3 – 14
Standoff diameter	6.5 mm	4 – 12
Standoff height	4 mm	2 – 10
Pilot / screw hole diameter	2.5 mm	1.5 – 3.4
Standoff spacing X	30 mm	10 – 36
Standoff spacing Y	24 mm	8 – 28

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS