Brackets and mounts
Hollow Rectangular Enclosure with Central Partition and Shaft Holes
- Bounding box
- 300.0 × 200.0 × 400.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- August 22, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a hollow rectangular enclosure for a mechanical assembly. The outer dimensions are 300mm wide, 200mm deep, and 400mm high. The wall thickness is 2mm. The top face is completely open. Inside the enclosure, add a vertical partition wall 2mm thick, exactly in the center, dividing the 300mm width into two equal 149mm compartments. On the left and right outer faces, exactly 50mm down from the top edge and centered on the 200mm depth, create a circular through-hole with a diameter of 10mm for mounting a rotating shaft. Fillet all outer edges with a 5mm radius
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Width | 300 mm | 50 – 600 |
| Outer Depth | 200 mm | 50 – 600 |
| Outer Height | 400 mm | 50 – 800 |
| Wall Thickness | 2 mm | 1 – 10 |
| Partition Thickness | 2 mm | 1 – 10 |
| Shaft Hole Diameter | 10 mm | 2 – 50 |
| Hole Distance From Top | 50 mm | 5 – 300 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent