Everything else
Hollow Cylinder with Pockets and Bottom Slot
- Bounding box
- 48.0 × 48.0 × 95.0 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a hollow cylinder with an outer diameter of 48mm, a total length of 95mm, and a wall thickness of 2.5mm. On the front flat face, cut a square pocket 19.3mm wide and 20mm deep. On the back flat face, cut a circular pocket 34.4mm in diameter and 9.2mm deep. Cut a 15mm wide slot through the bottom wall
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | 48 mm | 20 – 200 |
| Cylinder Length | 95 mm | 10 – 500 |
| Wall Thickness | 2.5 mm | 0.5 – 10 |
| Square Pocket Side | 19.3 mm | 1 – 47 |
| Square Pocket Depth | 20 mm | 0.5 – 95 |
| Circular Pocket Diameter | 34.4 mm | 1 – 47 |
| Circular Pocket Depth | 9.2 mm | 0.5 – 95 |
| Slot Width | 15 mm | 1 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like