Everything else
Hollow Cone Cap
- Bounding box
- 4.2 × 4.2 × 3.0 mm
- Engine
- Precision B-rep
- Parameters
- 3
- Published
- September 2, 2026
Download
Free to download and use. See the terms.
The prompt
make me a cone that can fit on top of a 4 inches cylinder that is 0.1 inches thickness going inwards, the cone should be mostly hollow except for a 0.1 thickness the cone should also be 3 inches tall
Parameters
| Name | Value | Range |
|---|---|---|
| Base Inner Diameter | 4 in | 1 – 12 |
| Wall Thickness | 0.1 in | 0.02 – 0.5 |
| Height | 3 in | 0.5 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like