HLK-LD2420 Wall-Mount Enclosure Base

1 views

Bounding box: 35.0 × 12.0 × 32.0 mm
Engine: Precision B-rep
Parameters: 18
Published: October 25, 2026

Download

Free to download and use. See the terms.

The prompt

Создай параметрическую CAD-модель корпуса с регулируемым настенным креплением для радарного датчика присутствия Hi-Link HLK-LD2420 24 GHz. Назначение: Компактный разборный корпус для эксплуатации внутри помещения. Изготовление методом FDM-печати. Внутри находится только HLK-LD2420, без ESP32, ESP8266, блока питания и других плат.

Parameters

Name	Value	Range
PCB width (X)	28 mm	20 – 50
PCB height (Z)	24 mm	15 – 50
PCB clearance	1.5 mm	0.5 – 3
PCB hole spacing X	20 mm	10 – 40
PCB hole spacing Z	15 mm	8 – 40
PCB boss diameter	4 mm	2 – 6
PCB boss height	3 mm	2 – 6
PCB screw hole dia	2 mm	1.5 – 3
Wall thickness	2 mm	1.5 – 3
Back wall thickness	2 mm	1.5 – 3
Cavity depth	7 mm	5 – 12
Mount plate thickness	3 mm	2 – 5
Mount plate width	35 mm	30 – 60
Mount plate height	32 mm	24 – 60
Wall screw spacing	22 mm	15 – 40
Slot width	4 mm	2.5 – 7
Slot length	12 mm	6 – 24
Cable hole diameter	6 mm	3 – 12

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS