Brackets and mounts
Hinged UV Curing Tray with Strip Lid
- Bounding box
- 426.0 × 91.3 × 69.8 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- September 27, 2026
Download
Free to download and use. See the terms.
The prompt
- Add a top cover/lid that is permanently connected to the tray with a hinge along one long side, so the lid can open and close while staying attached. - The lid should fully cover the tray when closed. - The lid should open like a clamshell case. - Keep the tray and lid as a single assembly. Lid / cover requirements - The inside of the lid should include a mounting channel or recessed housing for a UV light strip. - The UV light strip area should run along the inside of the cover so it shines downward into the tray when closed. - Include a wire exit hole or small wire routing channel near one end of the lid for power wiring. - The lid should have enough internal clearance so it can close over the checkers and dice without crushing them. - Keep the cover simple and clean, matching the style of the tray. Hinge requirements - Use an integrated hinge along one long side. - Prefer a durable printed hinge (for example, hinge knuckles for a pin) rather than a thin flexible living hinge. - Make the hinge parametric so hinge size and pin diameter can be adjusted later. Tray requirements to preserve - Keep 15 checker slots on the left - Keep 15 checker slots on the right - Keep the smaller center dice compartment - Keep the short edge tabs for each checker slot, not full-length separators - Keep checker dimensions at 38 mm diameter and 8.5 mm thickness - Keep the overall tray width and general proportions the same
Parameters
| Name | Value | Range |
|---|---|---|
| Wall Thickness | 3 mm | 1.5 – 8 |
| Bottom Thickness | 3 mm | 1.5 – 8 |
| Tray Height | 22 mm | 12 – 60 |
| Corner Fillet Radius | 6 mm | 0 – 12 |
| Checker Slots Per Side | 15 slots | 1 – 30 |
| Slot Width | 10 mm | 9 – 16 |
| Checker Bay Interior Width | 40 mm | 38 – 60 |
| Separator Tab Thickness | 3 mm | 1.5 – 6 |
| Separator Tab Height | 12 mm | 5 – 30 |
| Short Tab Reach | 8 mm | 2 – 16 |
| Checker Diameter | 38 mm | 10 – 60 |
| Checker Thickness | 8.5 mm | 2 – 20 |
| Dice Bay Length | 30 mm | 15 – 120 |
| Dice Bay Width | 30 mm | 15 – 60 |
| Lid Height (Cover Depth) | 30 mm | 15 – 80 |
| Lid Roof Thickness | 7 mm | 3 – 15 |
| Lid Wall Thickness | 3 mm | 1.5 – 8 |
| Modelled Open Angle | 105 deg | 20 – 170 |
| UV Strip Channel Width | 12 mm | 5 – 30 |
| UV Strip Recess Depth | 5 mm | 2 – 12 |
| Wire Exit Hole Dia | 4 mm | 2 – 10 |
| Hinge Pin Diameter | 4 mm | 2 – 10 |
| Knuckle Outside Dia | 10 mm | 6 – 20 |
| Knuckle Pitch | 40 mm | 15 – 150 |
| Knuckle Gap | 1 mm | 0.5 – 4 |
| Hinge End Margin | 30 mm | 10 – 100 |
| Pin Overhang Per End | 3 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu