Brackets and mounts
Hinged Cup Holder Clamp for 45mm Square Tube
- Bounding box
- 107.0 × 88.0 × 65.5 mm
- Engine
- Precision B-rep
- Parameters
- 27
- Published
- October 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D model of a cup holder clamp for a **45 mm × 45 mm horizontal square tube**. **Main body:** rigid bracket with a cylindrical cup holder projecting outward from the tube. **Clamp:** The bracket wraps around the square tube using a separate hinged latch arm. **Hinged latch arm:** - Separate flat vertical arm - Bottom-mounted horizontal pivot screw - Arm pivots downward to OPEN - Arm pivots upward to CLOSE around the square tube - Arm must NOT be fused into the main body **Locking mechanism:** - Butterfly/wing-head screw located at the TOP of the latch arm - Threaded receiver located in the main bracket - When latch arm swings upward, the butterfly screw aligns with the threaded receiver - Tightening the butterfly screw pulls the latch arm against the square tube and locks the assembly **Tube:** 45 mm × 45 mm square, horizontal orientation. The latch must visibly be a **moving hinged arm** with a bottom pivot and a top butterfly screw. Do not create a solid enclosed block or fixed clamp.
Parameters
| Name | Value | Range |
|---|---|---|
| Tube size | 45 mm | 10 – 100 |
| Clamp clearance | 0.5 mm | 0.1 – 2 |
| Side plate thickness | 3 mm | 1 – 10 |
| Bracket depth | 40 mm | 10 – 100 |
| Flange thickness | 3 mm | 1 – 10 |
| Top flange reach | 23 mm | 0 – 50 |
| Bottom flange reach | 23 mm | 0 – 50 |
| Latch gap | 0.5 mm | 0.1 – 2 |
| Latch arm thickness | 3 mm | 1 – 10 |
| Latch arm width | 20 mm | 5 – 50 |
| Latch top tab length | 0 mm | 0 – 10 |
| Latch top extra height | 8 mm | 0 – 20 |
| Edge fillet | 0.8 mm | 0 – 3 |
| Cup outer diameter | 50 mm | 20 – 100 |
| Cup depth | 60 mm | 20 – 150 |
| Cup bottom thickness | 3 mm | 1 – 10 |
| Cup wall thickness | 2 mm | 1 – 10 |
| Cup overlap with bracket | 3 mm | 0 – 20 |
| Pivot screw diameter | 4 mm | 2 – 12 |
| Pivot head diameter | 8 mm | 4 – 20 |
| Pivot head thickness | 2 mm | 1 – 5 |
| Butterfly shaft diameter | 3 mm | 1.5 – 8 |
| Butterfly head diameter | 12 mm | 5 – 30 |
| Butterfly head thickness | 5 mm | 2 – 15 |
| Receiver boss length | 10 mm | 5 – 30 |
| Receiver boss width | 16 mm | 5 – 30 |
| Receiver boss height | 6 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu