Hexagonal Controller Display Vault (Exploded Multi-Part)

Create a parametric 3D-printable hexagonal controller display vault. Overall size: 240mm wide × 208mm high × 140mm deep. Internal usable space: approximately 200 × 200 × 130mm. It must be deep enough to hold either a game controller OR a retail controller box. Use 4 main printed parts: 1. FRONT FRAME - Hexagonal ring - 240 × 208mm - Approx. 30mm frame width - Large central opening - Mounting points for side panels - Removable accent locations 2. BACK PLATE - Matching solid hexagon - 240 × 208mm - 10–12mm thick - 4 wall-mount keyhole slots - Side-panel mounting points - Flat enough for freestanding shelf use 3. SIDE PANEL ×2 - Two identical parts, mirrored/rotated as required - Creates the full 140mm enclosure depth - Approx. 10–12mm thick - Connects front frame to back plate - Must preserve approximately 130mm internal depth 4. ACCENT STRIPS ×6 - One removable strip per hexagonal side - Approx. 170 × 20mm - Cosmetic only - Snap/clip onto the front frame - Designed for different colours OPTIONAL: Create a removable controller holder that sits inside the vault. It must be removable so the full cavity can hold a retail controller box. Design for FDM printing: PLA/PETG, 0.2mm layers, 3–4 walls, 15–25% infill, minimal/no supports. Use approximately 0.3mm clearance for printed interfaces. Include wall mounting and optional freestanding use. Make all dimensions parametric and create separate solid bodies: Front_Frame, Back_Plate, Side_Panel, Accent_Strip, Controller_Holder. Provide front, back, side, top, section and exploded assembly views. IMPORTANT: This is a DEEP HEXAGONAL DISPLAY CABINET, NOT a shallow picture frame. The 140mm external depth and 130mm usable internal depth are critical.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.