Loading the interactive model…
Interactive 3D model of Herringbone Ring with T-Slot Wedge DrawersGears and transmission
Herringbone Ring with T-Slot Wedge Drawers
10 views
- Bounding box
- 220.0 × 220.0 × 16.0 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- August 14, 2026
Download
Free to download and use. See the terms.
The prompt
Focuses on generating a single 220\text{ mm} diameter ring with an 8:1 herringbone gear profile, an 8\text{ mm} central shaft bore, T-slot radial rails, and two matching 18^\circ "pizza slice" wedge drawers with M3 assembly points.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter | 220 mm | 80 – 400 |
| Shaft bore | 8 mm | 4 – 50 |
| Ring thickness | 10 mm | 4 – 25 |
| Gear module | 2.5 mm | 0.5 – 8 |
| Helix angle | 15 deg | 0 – 45 |
| T-slot inner radius | 30 mm | 15 – 60 |
| T-slot top width | 5 mm | 2 – 10 |
| T-slot bottom width | 12 mm | 6 – 20 |
| T-slot top depth | 3 mm | 1 – 6 |
| T-slot bottom depth | 4 mm | 1 – 8 |
| Drawer wedge angle | 18 deg | 5 – 45 |
| Drawer plate height | 6 mm | 2 – 20 |
| M3 clearance hole dia | 3.2 mm | 2.5 – 6 |
| M3 hole 1 radius | 50 mm | 35 – 90 |
| M3 hole 2 radius | 80 mm | 45 – 105 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
STEPSTLGLB16 PARAMS
Spur Gear (12 Teeth)
Built a gear with 12 teeth
STEPSTLGLB5 PARAMS
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
STEPSTLGLB7 PARAMS