Loading the interactive model…
Interactive 3D model of Herringbone Ring Gear with Wedge DrawersGears and transmission
Herringbone Ring Gear with Wedge Drawers
16 views
- Bounding box
- 220.0 × 220.0 × 20.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- August 14, 2026
Download
Free to download and use. See the terms.
The prompt
Focuses on generating a single 220\text{ mm} diameter ring with an 8:1 herringbone gear profile, an 8\text{ mm} central shaft bore, T-slot radial rails, and two matching 18^\circ "pizza slice" wedge drawers with M3 assembly points.
Parameters
| Name | Value | Range |
|---|---|---|
| Ring Outer Dia | 220 mm | 100 – 400 |
| Ring Bore Dia | 8 mm | 4 – 60 |
| Ring Thickness | 20 mm | 5 – 60 |
| Gear Teeth | 112 teeth | 20 – 300 |
| Herringbone Helix Angle | 25 deg | 0 – 45 |
| Drawer Wedge Angle | 18 deg | 5 – 45 |
| Drawer Inner Radius | 10 mm | 5 – 50 |
| Drawer Radial Length | 95 mm | 30 – 150 |
| Drawer/Slot Thickness | 18 mm | 3 – 20 |
| T-Slot Angular Clearance | 0.5 deg | 0 – 2 |
| M3 Clearance Hole Dia | 3.2 mm | 2 – 8 |
| M3 Hole 1 Radial Position | 28 mm | 10 – 100 |
| M3 Hole 2 Radial Position | 68 mm | 10 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
STEPSTLGLB16 PARAMS
Spur Gear (12 Teeth)
Built a gear with 12 teeth
STEPSTLGLB5 PARAMS
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
STEPSTLGLB7 PARAMS