Everything else
Heavy-Duty Trapezoidal Car Window Ice Scraper
- Bounding box
- 113.8 × 160 × 6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 6, 2026
Download
Free to download and use. See the terms.
The prompt
Create a flat, heavy-duty trapezoidal car window ice scraper on the XY plane with a completely flat top and bottom surface and a uniform thickness of 6.0 mm. The outer body measures 160.0 mm long along the Y-axis, tapering from a 115.0 mm wide front scraping edge down to an 85.0 mm wide rear handle, with 6.0 mm filleted vertical corners. Along the 115.0 mm front edge, cut a 45-degree bevel starting at Z = 0.8 mm and rising to Z = 6.0 mm, leaving a 0.8 mm flat bottom lip. Cut a horizontal stadium-shaped thumb grip slot measuring 65.0 mm wide by 28.0 mm long (with 14.0 mm rounded ends) centered on the X-axis and positioned 22.0 mm from the rear edge. On the right angled side edge, 75.0 mm from the rear, cut a 4.0 mm wide by 15.0 mm deep slot perpendicular to the side edge for de-icing wiper blades. Cut a 6.0 mm cylindrical through-hole near the rear-left corner (inset 12.0 mm from the left and rear edges).
Parameters
| Name | Value | Range |
|---|---|---|
| Length along Y-axis | 160 mm | 120 – 220 |
| Front edge width | 115 mm | 90 – 160 |
| Rear handle width | 85 mm | 60 – 120 |
| Overall thickness | 6 mm | 4 – 10 |
| Vertical corner fillet radius | 6 mm | 2 – 12 |
| Bottom flat lip height | 0.8 mm | 0.4 – 2 |
| Bevel angle | 45 deg | 30 – 60 |
| Thumb slot width | 65 mm | 40 – 90 |
| Thumb slot length | 28 mm | 16 – 40 |
| Distance from rear edge to slot start | 22 mm | 10 – 40 |
| Wiper slot width | 4 mm | 2 – 8 |
| Wiper slot depth | 15 mm | 8 – 25 |
| Wiper slot distance from rear | 75 mm | 40 – 120 |
| Lanyard hole diameter | 6 mm | 3 – 10 |
| Hole inset from left edge | 12 mm | 8 – 20 |
| Hole inset from rear edge | 12 mm | 8 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm