Gears and transmission
Heavy-Duty Motor Mount L-Bracket
- Bounding box
- 150.0 × 100.0 × 150.0 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- October 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create a heavy-duty, right-angle structural mechanical mounting L-bracket for an industrial motor drive system. Both the base foot plate and vertical mounting face plate must be 150 mm long, 100 mm wide, and constructed out of 6 mm thick heavy plate steel. The interior bend radius should be sharp at 90 degrees with zero gussets. The vertical face plate must feature an array of four pre-drilled cylindrical mounting bolt holes with a diameter of 8 mm each, spaced precisely in a symmetrical square pattern 80 mm apart from center to center to receive an industrial gear motor axle shaft housing assembly.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Length | 150 mm | 120 – 200 |
| Base Plate Width | 100 mm | 80 – 150 |
| Vertical Plate Height | 150 mm | 120 – 200 |
| Plate Thickness | 6 mm | 4 – 12 |
| Hole Diameter | 8 mm | 4 – 12 |
| Hole Spacing | 80 mm | 50 – 100 |
| Number of Holes | 4 count | 4 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled