Heavy-Duty Hinged Cheburek Press Mold

A parametric 3D model of a heavy-duty manual cheburek press mold designed as a two-piece hinged book-style folder assembly. The model must consist of exactly two separate asymmetrical interlocking halves (top half and bottom half) connected by a robust cylindrical hinge mechanism, with an adjustable internal diameter of 150mm to 170mm. REQUIRED FEATURES:1. TWO-PIECE FOLDER DESIGN: The two halves must open and close precisely like a book, aligning perfectly when pressed together. 2. SOLID CLOSED BOTTOM: The exterior underside base of both mold halves must be completely smooth, flat, and 100% solid. All open spaces between reinforcement ribs or geometric stripes must be fully filled with solid plastic to create a closed, flat, hygienic surface from the outside. 3. WIDE CRIMPING & SHARP KNIFE: The semi-circular sealing seam must be extra-wide (10mm width)with a deep, strong texturing pattern to tightly lock the dough. The outermost edge must feature a highly pronounced, sharp, built-in V-shaped cutting rim on one half (with a matching receptor groove on the other half) to cleanly shear off excess dough upon closing. 4. SHORTENED HANDLES: The ergonomic handles on both halves must be designed short and extremely thick. They must be solid, stubby block handles fused deeply into the mold walls to prevent breaking under heavy hand pressure. 5. UNBREAKABLE HINGE PIN: The connecting hinge pin must be a heavy-duty solid cylindrical shaft. Instead of a fragile end clip, it must lock securely on the end using a thick reinforced head or a robust mechanical locking slot that cannot snap when pressing. Optimized for FDM-STL 3D printing as a manifold solid assembly.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.