Everything else
HAWT Blade - Flat Cardboard 6 x 1 x 1/4 in
- Bounding box
- 6.0 × 1.0 × 0.1 mm
- Engine
- Precision B-rep
- Parameters
- 7
- Published
- October 27, 2026
Download
Free to download and use. See the terms.
The prompt
Create a simple, accurate engineering blueprint of ONE small horizontal-axis wind turbine blade for a school STEM project. The blade must be 6 inches long, 1 inch wide at the root, and 1/4 inch wide at the tip. Include a top view, side view, clear dimension arrows labeled in inches, and a simple flat blade shape suitable for making from cardboard or an index card. Show only one blade, not the entire turbine. Keep the design realistic, simple, and easy to cut out by hand.
Parameters
| Name | Value | Range |
|---|---|---|
| Blade Length (root end to tip) | 6 in | 3 – 12 |
| Root Chord (width at root) | 1 in | 0.4 – 3 |
| Tip Chord (width at tip) | 0.25 in | 0.05 – 1.5 |
| Material Thickness | 0.06 in | 0.01 – 0.25 |
| Root Tab Length | 0.75 in | 0.2 – 2 |
| Hub Dowel Hole Diameter | 0.25 in | 0.05 – 0.6 |
| Hole Distance From Root End | 0.38 in | 0.1 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm