Brackets and mounts
Hat-Brim Camera Mount - Exploded Part Set
- Bounding box
- 632.2 × 106.0 × 61.0 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- September 15, 2026
Download
Free to download and use. See the terms.
The prompt
Use very short prompts and generate **one part at a time**. Try these: 1. Crown arch: > Curved cap crown support, inner radius 85mm, width 20mm, thickness 6mm, arc 110°. Add 3 magnet holes, Ø10.2mm x 2.1mm deep. Add M5 mounting holes at both ends. PETG printable. 2. Brim clamp: > 2-piece hat brim clamp, 20mm wide, 24mm long jaws, 5mm thick, 3mm brim gap, Ø5.2mm M5 bolt hole. Rounded edges, PETG printable. 3. Under-brim rail: > Under-brim camera support rail, 120mm long, 16mm wide, 5mm thick. Add 30x5.4mm adjustment slots at both ends and a 40x5.4mm center slot. 4. Drop arm: > Adjustable camera drop arm, 55mm tall, 16mm wide, 6mm thick. Add vertical 30x5.4mm slot. Rounded structural fillets. 5. Camera fork: > Action camera 2-prong mount. Prongs 3.2mm thick, 3.5mm gap, 15mm tall. Add Ø5.2mm horizontal bolt hole and 20x20x6mm base. Then assemble them like: ```text CROWN ARCH ↓ ↓ LEFT RIGHT CLAMP CLAMP \ / UNDER-BRIM RAIL | DROP ARM | CAMERA FORK | CAMERA ``` For most generative CAD tools, the best pattern is: > `Make [part], [main dimensions], [holes/slots], PETG printable.` Do **not** describe the full mechanism in every prompt. Generate the five parts separately, then assemble them afterward.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 30 mm | 5 – 80 |
| Crown Arch Inner Radius | 85 mm | 60 – 120 |
| Crown Arch Width | 20 mm | 10 – 40 |
| Crown Arch Thickness | 6 mm | 3 – 12 |
| Crown Arch Arc Angle | 110 deg | 60 – 180 |
| Magnet Pocket Diameter | 10.2 mm | 5 – 16 |
| Magnet Pocket Depth | 2.1 mm | 0.5 – 4 |
| Arch Mount Hole Dia (M5) | 5.2 mm | 3 – 8 |
| Brim Clamp Width | 20 mm | 10 – 40 |
| Brim Clamp Jaw Length | 24 mm | 12 – 50 |
| Brim Clamp Thickness | 5 mm | 3 – 12 |
| Brim Gap Relief | 3 mm | 1 – 8 |
| Clamp Bolt Hole Dia (M5) | 5.2 mm | 3 – 8 |
| Under-Brim Rail Length | 120 mm | 60 – 200 |
| Rail Width | 16 mm | 8 – 30 |
| Rail Thickness | 5 mm | 3 – 12 |
| End Slot Length | 30 mm | 10 – 60 |
| Centre Slot Length | 40 mm | 10 – 80 |
| Rail Slot Width (M5) | 5.4 mm | 3 – 8 |
| Drop Arm Height | 55 mm | 30 – 120 |
| Drop Arm Width | 16 mm | 8 – 30 |
| Drop Arm Thickness | 6 mm | 3 – 12 |
| Drop Arm Slot Length | 30 mm | 10 – 60 |
| Drop Arm Slot Width (M5) | 5.4 mm | 3 – 8 |
| Fork Base Size | 20 mm | 10 – 40 |
| Fork Base Thickness | 6 mm | 3 – 12 |
| Prong Thickness | 3.2 mm | 1.5 – 6 |
| Prong Gap | 3.5 mm | 1.5 – 8 |
| Prong Height | 15 mm | 5 – 30 |
| Fork Bolt Hole Dia (M5) | 5.2 mm | 3 – 8 |
| Camera Body Length | 60 mm | 30 – 90 |
| Camera Body Height | 40 mm | 20 – 60 |
| Camera Body Depth | 30 mm | 15 – 50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent