Brackets and mounts
Hang Glider Assembly
- Bounding box
- 7659.0 × 5100.0 × 11054.2 mm
- Engine
- Precision B-rep
- Parameters
- 37
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Act as an expert aerospace and mechanical engineer. Generate a complete parametric 3D CAD model of a high-performance Rogallo-wing hang glider. Model the following components with strict adherence to these engineering specifications:Control Frame: 6061-T6 aluminum tubing, 50 mm outer diameter, 3 mm wall thickness. Base bar length: 1.2 m. Uprights length: 1.5 m, connected via CNC-machined titanium brackets.Leading Edges & Keel: 7075-T6 aluminum tubing, 60 mm outer diameter. Keel length: 4.5 m. Left and right leading edges: 5.5 m swept at a 35-degree angle.Sail / Wing: Modeled as an aerodynamic loft surface representing high-tenacity polyester (e.g., Dacron) or Technora sailcloth. Include tensioning battens (modeled as tapered carbon-fiber tubes) spaced every 30 cm.Rigging: Stainless steel 1 × 19 stranded wire cables, 3 mm diameter, connecting the kingpost to the leading edges and control frame.Include standard aerospace fasteners (AN bolts), a pilot hang point, and a streamlined kingpost. Output the design as a clean, modular STEP file assembly (.stp) compatible with SolidWorks, organizing each subsystem (frame, rigging, sail) into separate sub-assemblies.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 200 mm | 50 – 500 |
| Keel Outer Diameter | 60 mm | 30 – 100 |
| Keel Wall Thickness | 4 mm | 1 – 10 |
| Keel Length | 4500 mm | 1000 – 8000 |
| Leading Edge OD | 60 mm | 30 – 100 |
| Leading Edge Wall | 4 mm | 1 – 10 |
| Leading Edge Length | 5500 mm | 1000 – 9000 |
| Leading Edge Sweep Angle | 35 deg | 20 – 55 |
| Control Frame OD | 50 mm | 25 – 80 |
| Control Frame Wall | 3 mm | 1 – 8 |
| Base Bar Length | 1200 mm | 600 – 2000 |
| Upright Length | 1500 mm | 800 – 2500 |
| Bracket Body Size | 80 mm | 40 – 150 |
| Bracket Height | 30 mm | 15 – 60 |
| Bracket Wall Thickness | 5 mm | 3 – 15 |
| Kingpost Chord | 40 mm | 20 – 80 |
| Kingpost Thickness | 20 mm | 10 – 40 |
| Kingpost Height | 900 mm | 400 – 1500 |
| Sail Half-Span | 5000 mm | 2000 – 7000 |
| Sail Root Chord | 3000 mm | 1000 – 5000 |
| Sail/Loft Thickness | 5 mm | 1 – 20 |
| Batten Count | 7 | 3 – 10 |
| Batten Root OD | 18 mm | 8 – 30 |
| Batten Tip OD | 10 mm | 4 – 20 |
| Rigging Wire Diameter | 3 mm | 1 – 8 |
| Upper Side Wire Length | 3200 mm | 1000 – 5000 |
| Lower Side Wire Length | 2500 mm | 1000 – 4000 |
| Front Wire Length | 900 mm | 400 – 1500 |
| Hang Point Plate Length | 120 mm | 60 – 200 |
| Hang Point Plate Width | 60 mm | 30 – 100 |
| Hang Point Plate Thickness | 10 mm | 4 – 20 |
| Hang Ring Inner Diameter | 25 mm | 12 – 50 |
| Hang Ring Wire Diameter | 5 mm | 3 – 10 |
| AN Bolt Diameter | 6 mm | 3 – 12 |
| AN Bolt Length | 25 mm | 10 – 60 |
| AN960 Washer OD | 14 mm | 8 – 25 |
| AN960 Washer Thickness | 1.6 mm | 0.5 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu