23.238.67.2
Loading the interactive model…
Interactive 3D model of Handy Brush Top-Hole Plug (Red and Blue)

Everything else

Handy Brush Top-Hole Plug (Red and Blue)

1 views
Bounding box
38.6 × 23.2 × 7.2 mm
Engine
3D Printing B-rep
Parameters
14
Published
November 22, 2026

Download

Free to download and use. See the terms.

The prompt

Snug press-fit plug for the smaller top hole of a Scotch-Brite Handy Brush handle, shaped from the user's traced outline (about 14 x 21 mm, rounded bottom). One red and one blue copy, fully parametric.

Parameters

NameValueRange
Hole width, widest point14 mm8 – 30
Hole length along the handle21 mm10 – 40
Corner radius at the tip end (flatter end)2.5 mm0.5 – 7
Corner radius at the rounded end (towards the logo)6.5 mm1 – 10
Wall thickness the plug passes through4 mm1 – 12
Gap per side before ribs (raise if too tight)0.1 mm0 – 0.4
Crush rib height (lower if too tight, raise if loose)0.25 mm0 – 0.6
Crush ribs on each long side2 mm0 – 3
Stem length past the wall2 mm0 – 6
Flange overhang beyond hole (0 = flush, no flange)1.2 mm0 – 4
Flange thickness1.2 mm0.6 – 3
Include red copy1 mm0 – 1
Include blue copy1 mm0 – 1
1 = short 3 mm test stem to check the fit fast0 mm0 – 1

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Handy Brush Top-Hole Plug (Red and Blue) - Free CAD Model (STEP, STL) | TextoCAD