Everything else
Handheld Controller Shell with Top Triggers
- Bounding box
- 150.0 × 113.0 × 34.0 mm
- Engine
- Precision B-rep
- Parameters
- 41
- Published
- September 29, 2026
Download
Free to download and use. See the terms.
The prompt
mkae top triggers and remove the side bumps
Parameters
| Name | Value | Range |
|---|---|---|
| Shell Width (X) | 150 mm | 80 – 260 |
| Shell Depth (Y) | 100 mm | 60 – 200 |
| Shell Height (Z) | 28 mm | 12 – 60 |
| Plan-View Corner Radius | 22 mm | 0 – 60 |
| Hand Curve Length (ref) | 260 mm | 100 – 500 |
| Top/Bottom Edge Round | 3 mm | 0 – 12 |
| Corner Screw Holes | 4 pcs | 0 – 4 |
| Corner Screw Hole Dia | 3.2 mm | 1 – 8 |
| Screw Inset From Edge | 10 mm | 3 – 40 |
| Centre Button Holes | 1 pcs | 0 – 1 |
| Centre Button Dia | 12 mm | 0 – 40 |
| Action Cluster X | 45 mm | 0 – 120 |
| Action Cluster Y | -18 mm | -80 – 80 |
| Action Button Pitch Radius | 9 mm | 3 – 25 |
| Action Button Holes | 4 pcs | 0 – 4 |
| Action Button Dia | 9 mm | 2 – 30 |
| Port Holes | 1 pcs | 0 – 1 |
| Port Dia | 9 mm | 2 – 30 |
| Port X | -50 mm | -120 – 120 |
| Port Y | -34 mm | -90 – 90 |
| Display Recess Width | 60 mm | 10 – 140 |
| Display Recess Height | 40 mm | 10 – 120 |
| Display Centre Y | 12 mm | -60 – 60 |
| Display Recess Depth | 2 mm | 0.5 – 10 |
| D-Pad Centre X | -45 mm | -120 – 120 |
| D-Pad Centre Y | -18 mm | -80 – 80 |
| D-Pad Span | 34 mm | 10 – 80 |
| D-Pad Arm Width | 12 mm | 4 – 30 |
| D-Pad Pocket Depth | 2 mm | 0.5 – 10 |
| Speaker Hole Count | 6 pcs | 0 – 20 |
| Speaker Hole Dia | 2.5 mm | 0.5 – 8 |
| Speaker Hole Pitch | 5 mm | 1 – 20 |
| Speaker Row Y | -42 mm | -90 – 90 |
| Trigger Width (X) | 16 mm | 6 – 40 |
| Trigger Reach Past Edge (Y) | 14 mm | 4 – 45 |
| Trigger Height (Z) | 12 mm | 4 – 32 |
| Trigger X Offset | 48 mm | 10 – 110 |
| Trigger Embed Into Shell | 8 mm | 2 – 25 |
| Trigger Front Taper Ratio | 0.35 ratio | 0.05 – 0.6 |
| Trigger Corner Round | 2 mm | 0 – 6 |
| Trigger Pivot Hole Dia | 4 mm | 0 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm