Halo F1 Display Stand

1 views

Bounding box: 70 × 80 × 66 mm
Engine: 3D Printing B-rep
Parameters: 15
Published: November 13, 2026

Download

Free to download and use. See the terms.

The prompt

Halof1

Parameters

Name	Value	Range
Ring length front-to-back	68 mm	40 – 120
Ring width at the rear	48 mm	30 – 100
Ring width at the front	36 mm	20 – 80
Ring tube width in plan	7.5 mm	5 – 14
Ring tube height	11 mm	6 – 20
Ring underside height above the bed	55 mm	30 – 100
Base plate width	70 mm	40 – 140
Base plate depth	80 mm	50 – 160
Base plate thickness	8 mm	4 – 20
Base plate corner radius	10 mm	3 – 25
Rear post diameter at the base	14 mm	8 – 24
Rear post diameter at the top	8 mm	5 – 18
Front pillar width	12 mm	6 – 30
Front pillar depth	8 mm	5 – 20
Lettering height on the plate	0.8 mm	0.6 – 2

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS