3D preview of Hall-Sensor Magnet Track
Loading the interactive model…
Interactive 3D model of Hall-Sensor Magnet Track

Everything else

Hall-Sensor Magnet Track

1 views
Bounding box
29.4 × 12.1 × 12.9 mm
Engine
3D Printing B-rep
Parameters
16
Published
November 20, 2026

Download

Free to download and use. See the terms.

The prompt

i only need 2 magnets facing each other with distance of 20mm between them

Parameters

NameValueRange
Magnet diameter4 mm2 – 10
Magnet thickness1 mm0.5 – 5
Magnets total, stacked in facing pairs2 mm2 – 10
Facing magnets, centre to centre20 mm5 – 60
Pocket clearance per side0.15 mm0.05 – 0.4
Extra pocket depth for glue0.2 mm0 – 1
Sensor / PCB width5.2 mm3 – 15
Sensor / PCB thickness1.5 mm0.8 – 8
Channel clearance per side0.25 mm0.1 – 0.6
Wall above the channel2.4 mm1.2 – 8
Wall beside the channel3.2 mm1.2 – 10
Material between magnet and channel1.6 mm0.8 – 5
Material under the magnet bores1.6 mm1 – 6
Body length beyond the magnet pocket4 mm1 – 20
Corner radius in plan3 mm0 – 8
Chamfer on the bed edge0.6 mm0 – 2

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Hall-Sensor Magnet Track - Free CAD Model (STEP, STL) | TextoCAD