Everything else
H-1 Cenevre Revolver Pod – Gövde
- Bounding box
- 270.0 × 80.1 × 70.1 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- October 28, 2026
Download
Free to download and use. See the terms.
The prompt
Gövde altına takılan komplikasyonlu atış mekanizması: Cenevre (Malta haçı) mekanizmalı 6 cepli döner tambur, N20 motor, MG90S emniyet kilit pimi
Parameters
| Name | Value | Range |
|---|---|---|
| Pod yarıçapı | 40 mm | 36 – 50 |
| Duvar kalınlığı | 3 mm | 2 – 4 |
| Üst düz yüzey (eksenden) | 30 mm | 26 – 36 |
| Burun boyu | 45 mm | 30 – 80 |
| Kuyruk boyu | 75 mm | 40 – 140 |
| Mekanizma bölmesi boyu | 40 mm | 34 – 60 |
| Perde kalınlığı | 4 mm | 3 – 6 |
| Tambur boyu | 64 mm | 40 – 100 |
| Servo bölmesi boyu | 36 mm | 32 – 50 |
| Çıkış ağzı eni | 34 mm | 20 – 40 |
| Tambur göbeği çapı | 12 mm | 8 – 16 |
| Cenevre eksen mesafesi | 22 mm | 18 – 26 |
| N20 yatağı boyu | 24 mm | 18 – 30 |
| N20 genişliği | 12 mm | 11 – 13 |
| N20 yüksekliği | 10 mm | 9 – 11 |
| Emniyet pimi çapı | 3 mm | 2 – 4 |
| Emniyet pimi yarıçapı | 28 mm | 20 – 31 |
| Montaj deliği (M3 insert) | 4 mm | 2.5 – 5.5 |
| Montaj deliği derinliği | 10 mm | 5 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm