Guard-Equipped Quadcopter with Underslung Servo Gripper

1 views

Bounding box: 240.5 × 240.5 × 183.4 mm
Engine: Precision B-rep
Parameters: 54
Published: October 13, 2026

Download

Free to download and use. See the terms.

The prompt

Now shape it like this quadcopter

Parameters

Name	Value	Range
Arm Length (centre to motor)	88 mm	50 – 150
Arm Width	20 mm	8 – 40
Frame Plate Thickness	4 mm	2 – 10
Centre Body Diameter	70 mm	30 – 120
Electronics Hub Diameter	40 mm	15 – 80
Electronics Hub Height	12 mm	2 – 40
Motor Pod Diameter	28 mm	14 – 60
Motor Pod Height	14 mm	4 – 40
Motor Shaft Bore	4 mm	1.5 – 12
Motor Bolt Hole Diameter	2.5 mm	1 – 6
Motor Bolt Circle	16 mm	6 – 40
Motor Bolt Count	4 count	2 – 8
Propeller Hub Diameter	12 mm	6 – 30
Propeller Hub Height	8 mm	2 – 20
Blades per Propeller	2 count	2 – 6
Blade Length	42 mm	15 – 80
Blade Chord (Width)	14 mm	4 – 40
Blade Thickness	2 mm	0.8 – 6
Blade Pitch Angle	15 deg	0 – 45
Guard Outer Diameter	116 mm	60 – 200
Guard Inner Diameter	104 mm	50 – 190
Guard Ring Thickness	3 mm	1 – 10
Guard Ring Height (Z)	20 mm	8 – 60
Support Struts per Guard	3 count	2 – 6
Strut Width	6 mm	2 – 20
Strut Thickness	3 mm	1 – 10
Skid Rail Length	90 mm	30 – 200
Skid Rail Width	10 mm	3 – 30
Skid Rail Height	8 mm	2 – 20
Skid Lateral Offset	45 mm	10 – 120
Leg Fore/Aft Offset	30 mm	5 – 90
Leg Diameter	6 mm	2 – 16
Skid Drop Below Frame	26 mm	5 – 60
Canopy Width	34 mm	10 – 80
Canopy Depth	46 mm	10 – 100
Canopy Height	10 mm	2 – 40
Camera Lens Diameter	12 mm	4 – 30
Camera Lens Length	8 mm	2 – 30
Mount Plate Width	44 mm	10 – 100
Mount Plate Depth	40 mm	10 – 100
Mount Plate Thickness	4 mm	2 – 12
Servo Body Width	20 mm	8 – 40
Servo Body Depth	40 mm	10 – 80
Servo Body Height	36 mm	10 – 80
Jaw Carrier Width	40 mm	10 – 100
Jaw Carrier Depth	34 mm	10 – 80
Jaw Carrier Height	40 mm	10 – 100
Jaw Gap	16 mm	0 – 60
Jaw Length (elongated)	90 mm	20 – 200
Jaw Width	14 mm	4 – 40
Jaw Thickness	5 mm	1 – 20
Jaw Pivot Pin Diameter	4 mm	1 – 12
Jaw Open Angle	20 deg	0 – 60
Gripper Wall Thickness	3 mm	1 – 10

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS