Everything else
Grooved Cylinder with Blind Bore and Top Dimple
- Bounding box
- 20.0 × 20.0 × 14.0 mm
- Engine
- Precision B-rep
- Parameters
- 10
- Published
- September 29, 2026
Download
Free to download and use. See the terms.
The prompt
print 2 Cylinder 20mm diameter × 14mm tall. Cut a 6mm diameter hole 8mm deep into the center of the bottom face. Fillet the top edge 2mm. Cut 24 vertical grooves 1mm wide × 0.6mm deep, evenly spaced around the outer surface. Cut a 4mm diameter dimple 1mm deep in the center of the top face.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer Diameter | 20 mm | 8 – 80 |
| Overall Height | 14 mm | 4 – 60 |
| Bottom Bore Diameter | 6 mm | 1 – 12 |
| Bottom Bore Depth | 8 mm | 1 – 14 |
| Top Edge Fillet Radius | 2 mm | 0.2 – 4 |
| Top Dimple Diameter | 4 mm | 1 – 8 |
| Top Dimple Depth | 1 mm | 0.2 – 3 |
| Groove Count | 24 count | 4 – 60 |
| Groove Width | 1 mm | 0.3 – 3 |
| Groove Depth | 0.6 mm | 0.1 – 2 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm