Brackets and mounts
GREEN RECEIPT Validation Station
- Bounding box
- 710.0 × 820.0 × 1330.0 mm
- Engine
- Precision B-rep
- Parameters
- 57
- Published
- September 26, 2026
Download
Free to download and use. See the terms.
The prompt
Create a compact freestanding industrial validation station for a cannabis sample testing system called GREEN RECEIPT. Target size: approximately 600 mm wide × 550 mm deep × 1,300 mm high. Design it like a compact stand-up arcade/laboratory appliance, with a stable wider base, rounded corners, clean professional appearance, and modular panels. FRONT CUSTOMER AREA: • Large touchscreen at comfortable standing height • Water-activity testing station on the LEFT • NIR scanner station on the RIGHT, opposite the water-activity station • Digital microscope/macro imaging station • Elevated sample discard opening at approximately 850–950 mm high • Clear workspace around all testing areas NIR: The NIR scanner is handheld and connected by cable. Create an internal wall-mounted docking stand with cable routing and a service loop. It must be removable for scanning and returned to the dock afterward. Do not permanently mount the NIR scanner on the exterior. WATER ACTIVITY: Create a dedicated recessed testing platform opposite the NIR station with enough space to place and remove a sample container. MICROSCOPE: Create a secure adjustable mounting area with a small sample platform for repeatable macro photography. SERVICE AREA: Behind the customer-facing enclosure, create a separate technician-accessible equipment compartment with removable mounting plates, cable-management space, ventilation, and lockable hinged service panels. Customer-accessible areas must not expose electronics, wiring, power supplies, or calibration controls. BASE: Include a stable lower base with leveling feet, protected cable entry, and removable access panel. MANUFACTURING: Design the enclosure as practical separate panels suitable for sheet metal, aluminum framing, composite panels, CNC cutting, or hybrid construction. Avoid unnecessary complex curves. Make the design fully parametric where possible. Keep the actual instrument dimensions adjustable because final hardware has not yet been selected. Reserve a prominent front area for: GREEN RECEIPT THE GROWN TRUTH Prioritize functionality, ergonomics, serviceability, safety, manufacturability, and compact size over decorative appearance. Generate the complete 3D enclosure and major internal mounting architecture, not merely a concept image.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Width | 600 mm | 400 – 1000 |
| Base Depth | 550 mm | 400 – 900 |
| Base Height | 400 mm | 200 – 600 |
| Base Corner Radius | 20 mm | 0 – 100 |
| Cable Entry Diameter | 40 mm | 10 – 100 |
| Access Panel Width | 200 mm | 100 – 400 |
| Access Panel Height | 150 mm | 50 – 300 |
| Access Panel Thickness | 3 mm | 1 – 10 |
| Main Enclosure Width | 600 mm | 400 – 1000 |
| Main Enclosure Depth | 550 mm | 400 – 900 |
| Main Enclosure Height | 900 mm | 600 – 1400 |
| Main Corner Radius | 20 mm | 0 – 100 |
| Touchscreen Width | 300 mm | 150 – 600 |
| Touchscreen Height | 200 mm | 100 – 400 |
| Touchscreen Depth | 20 mm | 5 – 100 |
| Touchscreen Center Height | 1000 mm | 700 – 1200 |
| Water Station Width | 200 mm | 100 – 400 |
| Water Station Depth | 150 mm | 80 – 300 |
| Water Station Height | 50 mm | 20 – 150 |
| Water Station Center Height | 900 mm | 700 – 1200 |
| Water Station X Offset | 20 mm | 0 – 200 |
| NIR Dock Width | 150 mm | 80 – 300 |
| NIR Dock Depth | 100 mm | 50 – 250 |
| NIR Dock Height | 80 mm | 40 – 200 |
| NIR Dock Center Height | 900 mm | 700 – 1200 |
| NIR Dock Right Margin | 20 mm | 0 – 100 |
| Microscope Bracket Width | 100 mm | 50 – 250 |
| Microscope Bracket Depth | 100 mm | 50 – 250 |
| Microscope Bracket Height | 50 mm | 20 – 150 |
| Sample Platform Width | 150 mm | 80 – 300 |
| Sample Platform Depth | 150 mm | 80 – 300 |
| Sample Platform Thickness | 5 mm | 1 – 20 |
| Microscope Center Height | 950 mm | 700 – 1200 |
| Discard Chute Width | 100 mm | 50 – 250 |
| Discard Chute Height | 80 mm | 40 – 200 |
| Discard Chute Depth | 150 mm | 50 – 300 |
| Discard Chute Center Height | 900 mm | 850 – 950 |
| Rear Service Width | 600 mm | 400 – 800 |
| Rear Service Depth | 250 mm | 150 – 400 |
| Rear Service Height | 900 mm | 600 – 1400 |
| Mounting Plate Width | 200 mm | 100 – 400 |
| Mounting Plate Height | 150 mm | 80 – 300 |
| Mounting Plate Thickness | 3 mm | 1 – 10 |
| Mounting Plate Count | 3 | 1 – 8 |
| Service Door Width | 300 mm | 200 – 500 |
| Service Door Height | 400 mm | 200 – 800 |
| Service Door Thickness | 20 mm | 5 – 100 |
| Service Door Count | 2 | 1 – 4 |
| Vent Panel Width | 200 mm | 100 – 400 |
| Vent Panel Height | 100 mm | 50 – 200 |
| Vent Panel Thickness | 10 mm | 1 – 30 |
| Vent Panel Count | 2 | 0 – 4 |
| Foot Pad Diameter | 50 mm | 30 – 100 |
| Foot Pad Height | 10 mm | 3 – 30 |
| Foot Stem Diameter | 12 mm | 6 – 20 |
| Foot Stem Height | 20 mm | 5 – 60 |
| Foot Corner Offset | 50 mm | 10 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Kugoo G2 Pro Rear Swingarm for KuKirin G4
Create a detailed 1:1 CAD drawing of custom rear swingarms for the Kugoo G2 Pro 2020 electric scooter. The swingarms must be designed to fit a KuKirin G4 hub motor instead of the o
Humanoid Robot Exploded Assembly
Design a 3D CAD model of a fully autonomous humanoid biped robot for the Robofest AI HOMO BOT competition. Dimensions Height: 800 mm (80 cm) Maximum weight: 20 kg Lightweight modu