Gravity-Fed Poker Chip Sorter

1 views

Bounding box: 300.0 × 300.0 × 575.0 mm
Engine: Precision B-rep
Parameters: 44
Published: November 3, 2026

Download

Free to download and use. See the terms.

The prompt

Create a simple 3D CAD model of a gravity-fed poker chip sorting machine. At the top, a vertical tube holds a stack of red and blue poker chips. A two-stage gate releases one chip at a time, allowing it to fall vertically into an inspection area. The inspection area has an IR presence sensor, a TCS3200 colour sensor, and a trapdoor that holds and releases the chip. Below it, a motor-controlled rotating flap directs the falling chip into one of two Y-shaped chutes, leading to separate collection bins. Use a simple grey frame, red and blue chips, and a green rotating flap. Show all components in an open-front isometric view. Use basic editable CAD shapes. This is only a concept model, not a detailed manufacturing design. No conveyor belts or horizontal transport.

Parameters

Name	Value	Range
Frame Width	300 mm	200 – 500
Frame Depth	300 mm	200 – 500
Frame Height	500 mm	300 – 800
Frame Member Size	10 mm	5 – 20
Magazine Tube Inside Diameter	45 mm	30 – 80
Magazine Tube Length	180 mm	100 – 300
Tube Wall Thickness	3 mm	1 – 10
Gate Length	60 mm	40 – 100
Gate Width	50 mm	40 – 100
Gate Height	20 mm	10 – 40
IR Sensor Length	20 mm	10 – 50
IR Sensor Width	15 mm	5 – 40
IR Sensor Height	10 mm	5 – 30
Colour Sensor Length	25 mm	10 – 50
Colour Sensor Width	20 mm	5 – 40
Colour Sensor Height	10 mm	5 – 30
Sensor Offset from Centre	45 mm	25 – 80
Trapdoor Length	50 mm	30 – 100
Trapdoor Width	50 mm	30 – 100
Trapdoor Thickness	5 mm	2 – 10
Flap Length	50 mm	30 – 100
Flap Height	40 mm	20 – 80
Flap Thickness	3 mm	1 – 10
Flap Angle	45 deg	-90 – 90
Servo Length	40 mm	20 – 60
Servo Width	20 mm	10 – 40
Servo Height	35 mm	20 – 60
Servo Offset from Centre	45 mm	25 – 80
Chute Width	120 mm	80 – 200
Chute Depth	100 mm	60 – 150
Chute Height	80 mm	50 – 150
Chute Inlet Size	50 mm	30 – 80
Chute Inlet Depth	50 mm	20 – 100
Chute Branch Width	45 mm	20 – 80
Chute Branch Depth	60 mm	20 – 100
Chute Branch Offset	35 mm	20 – 80
Bin Length	80 mm	40 – 150
Bin Width	80 mm	40 – 150
Bin Height	60 mm	30 – 120
Bin Wall Thickness	3 mm	1 – 10
Bin Centre Offset	45 mm	20 – 100
Chip Diameter	40 mm	30 – 60
Chip Thickness	3 mm	1 – 10
Chip Stack Count	10	1 – 40

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS