Everything else
GPZ500 Steering Angle Potentiometer Mount
- Bounding box
- 80.0 × 40.0 × 48.0 mm
- Engine
- Precision B-rep
- Parameters
- 14
- Published
- October 6, 2026
Download
Free to download and use. See the terms.
The prompt
For a motorbike simulator I want a design to measure the steering angle of a Kawasaki gpz 500 using a potentiometer
Parameters
| Name | Value | Range |
|---|---|---|
| Base Plate Length (X) | 80 mm | 60 – 140 |
| Base Plate Width (Y) | 40 mm | 30 – 90 |
| Base Plate Thickness | 8 mm | 5 – 16 |
| Mounting Hole Dia (M6 clearance) | 6.6 mm | 4 – 10 |
| Mounting Hole Spacing | 60 mm | 30 – 100 |
| Pot Body Bore Dia (Ø24 + clearance) | 24.4 mm | 16 – 40 |
| Clamp Block Depth (X) | 48 mm | 28 – 70 |
| Clamp Block Width (Y) | 34 mm | 24 – 60 |
| Clamp Block Height | 40 mm | 20 – 70 |
| Clamp Slit Width | 2.5 mm | 1 – 6 |
| Pinch Bolt Hole Dia (M4 clearance) | 4.3 mm | 3 – 8 |
| Pinch Bolt Height Above Plate | 26 mm | 8 – 60 |
| Shaft / Bushing Clearance Hole Dia | 10.5 mm | 6 – 16 |
| Corner Fillet Radius | 4 mm | 0.5 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm