goBILDA Motor Pinion

1 views

Bounding box: 16 × 16 × 6.0 mm
Engine: 3D Printing B-rep
Parameters: 9
Published: November 3, 2026

Download

Free to download and use. See the terms.

The prompt

piñon ára motor gobilda

Parameters

Name	Value	Range
Number of teeth	20 mm	8 – 60
Gear module	1.5 mm	0.5 – 3
Tooth face width	8 mm	3 – 20
Hub diameter	16 mm	8 – 30
Hub height above gear	6 mm	2 – 20
Motor D-shaft diameter	6 mm	3 – 10
Depth of D-shaft flat	0.5 mm	0 – 1.5
Bore clearance per side	0.2 mm	0.05 – 0.5
Set screw hole diameter	3.4 mm	2 – 6

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS