Loading the interactive model…
Interactive 3D model of Glock 19 PDW Lower ReceiverEverything else
Glock 19 PDW Lower Receiver
8 views
- Bounding box
- 242.5 × 30.0 × 160.0 mm
- Engine
- Precision B-rep
- Parameters
- 17
- Published
- August 20, 2026
Download
Free to download and use. See the terms.
The prompt
make a functional glock 19 pdw lower reciver
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Length | 200 mm | 150 – 300 |
| Overall Width | 25 mm | 20 – 40 |
| Overall Height | 120 mm | 80 – 180 |
| Wall Thickness | 3 mm | 2 – 6 |
| Magazine Well Width | 25 mm | 20 – 35 |
| Magazine Well Depth (front-to-back) | 35 mm | 25 – 50 |
| Magazine Well Height (upward) | 40 mm | 30 – 80 |
| Grip Diameter | 30 mm | 25 – 45 |
| Grip Height (below body) | 80 mm | 50 – 120 |
| Grip X Offset (from center) | 0 mm | -20 – 20 |
| Trigger Guard Cutout Width | 25 mm | 20 – 40 |
| Trigger Guard Cutout Depth | 15 mm | 10 – 30 |
| Trigger Guard Cutout Height (from bottom) | 30 mm | 20 – 50 |
| Buffer Tube Diameter | 25 mm | 20 – 35 |
| Buffer Tube Length | 60 mm | 40 – 100 |
| Pin Hole Diameter | 3 mm | 2 – 5 |
| Fillet Radius (may fail – skip if too large) | 2 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS