Glass-sponge lattice tower leg segment

3 views

Bounding box: 40 × 40 × 200 mm
Engine: 3D Printing B-rep
Parameters: 5
Published: November 10, 2026

Download

Free to download and use. See the terms.

The prompt

Square tower leg/strut segment, 200mm tall x 40mm x 40mm, one uniform lattice on all four faces inspired by Euplectella aspergillum: 2mm struts, ~8mm square cells, one offset diagonal brace per cell (endpoints S = L/(sqrt2+2) in from the corners), checkerboard-alternating direction.

Parameters

Name	Value	Range
Cross-section width / depth	40 mm	20 – 80
Segment height	200 mm	50 – 400
Strut thickness	2 mm	1.2 – 4
Cells across each face	5 mm	3 – 10
Cells along the height	26 mm	5 – 50

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS