Everything else
Glass Brick Beverage Dispenser
- Bounding box
- 149.9 × 117.5 × 118.0 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
Vreau o asa zisa carcasa prt cărămidă de sticla. Acest ansamblu vreau sa devina un dispenser pt bauturi
Parameters
| Name | Value | Range |
|---|---|---|
| Overall width X | 150 mm | 60 – 260 |
| Overall depth Y | 100 mm | 50 – 180 |
| Overall height Z | 110 mm | 60 – 200 |
| Edge rounding radius | 14 mm | 4 – 30 |
| Wall thickness | 3 mm | 1.6 – 6 |
| Rim width around the mouth | 6 mm | 3 – 15 |
| Lid plate thickness | 8 mm | 3 – 20 |
| Lid inset from the brick footprint | 2 mm | 0 – 10 |
| Corner radius of the mouth | 10 mm | 2 – 25 |
| Air vent hole diameter | 4 mm | 2 – 8 |
| Tap axis height above the bed | 22 mm | 12 – 60 |
| Tap barrel outer diameter | 19 mm | 10 – 32 |
| Nozzle drop below the tap axis | 16 mm | 8 – 40 |
| Nozzle outer diameter | 13 mm | 6 – 24 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm