Loading the interactive model…
Interactive 3D model of Giant Pacifier iPhone 16 Pro Case and Kickstand RingEverything else
Giant Pacifier iPhone 16 Pro Case and Kickstand Ring
9 views
- Bounding box
- 280.0 × 139.9 × 24.1 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- August 12, 2026
Download
Free to download and use. See the terms.
The prompt
Object 1 should be the main shield and phone dock body. It should look like a large pacifier to those dimensions with an embedded- with a space in the back for an embedded iPhone.
Parameters
| Name | Value | Range |
|---|---|---|
| Shield Width | 220 mm | 160 – 300 |
| Shield Height | 140 mm | 100 – 220 |
| Shield Thickness | 12 mm | 6 – 20 |
| Dock Pocket Width | 150 mm | 130 – 170 |
| Dock Pocket Height | 72 mm | 60 – 85 |
| Dock Pocket Depth | 8.5 mm | 5 – 12 |
| Camera Pocket Size | 38.5 mm | 30 – 50 |
| Camera Pocket Depth | 2.5 mm | 1 – 5 |
| Camera Pocket Y Offset | 0 mm | -20 – 20 |
| USB-C Cutout Width | 12 mm | 8 – 20 |
| USB-C Cutout Height | 8 mm | 4 – 15 |
| Speaker Cutout Width | 8 mm | 4 – 12 |
| Speaker Cutout Height | 8 mm | 4 – 15 |
| Speaker Cutout Spacing | 24 mm | 10 – 40 |
| Vent Slot Width | 8 mm | 4 – 15 |
| Vent Slot Height | 25 mm | 12 – 40 |
| Vent Slot X Offset | 65 mm | 40 – 95 |
| Vent Slot Y Offset | 45 mm | 20 – 60 |
| Pivot Boss Diameter | 50 mm | 30 – 70 |
| Pivot Boss Height | 12 mm | 5 – 25 |
| Pivot Bore Diameter | 8 mm | 4 – 14 |
| Pivot Bore Depth | 15 mm | 8 – 25 |
| Detent Hole Diameter | 3 mm | 1 – 6 |
| Detent Hole Depth | 4 mm | 1 – 8 |
| Detent Pattern Radius | 17 mm | 10 – 24 |
| Kickstand Ring Outer Diameter | 80 mm | 60 – 120 |
| Kickstand Ring Grip Diameter | 55 mm | 30 – 90 |
| Kickstand Ring Cross Section | 12 mm | 6 – 20 |
| Knuckle Width | 16 mm | 10 – 30 |
| Knuckle Height | 20 mm | 12 – 35 |
| Knuckle Pivot Hole Diameter | 8 mm | 4 – 14 |
| Ring Detent Pin Radius | 17 mm | 10 – 24 |
| Ring Detent Pin Diameter | 3 mm | 1 – 6 |
| Ring Detent Pin Height | 4 mm | 1 – 8 |
| Layout Gap Between Parts | 130 mm | 90 – 180 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS