Brackets and mounts
Ghost Bong Topper
- Bounding box
- 77.4 × 92.7 × 160.0 mm
- Engine
- Precision B-rep
- Parameters
- 33
- Published
- August 8, 2026
Download
Free to download and use. See the terms.
The prompt
functional ghost themed bong topper that fits a 16oz mason jar lid, has mouth piece air flow, a 14 mm bowl holder, a bic lighter holder and downstem
Parameters
| Name | Value | Range |
|---|---|---|
| Lid outer diameter | 70 mm | 40 – 100 |
| Lid wall thickness | 2 mm | 1 – 6 |
| Lid ring height | 20 mm | 10 – 30 |
| Ghost shroud thickness | 2 mm | 0.5 – 5 |
| Shroud dome height above lid | 15 mm | 0 – 40 |
| Ghost eye radius | 4 mm | 1 – 10 |
| Ghost eye radial offset | 10 mm | 5 – 20 |
| Lighter sleeve inner width | 23 mm | 15 – 30 |
| Lighter sleeve inner depth | 13 mm | 8 – 20 |
| Lighter sleeve height | 80 mm | 40 – 120 |
| Lighter sleeve wall thickness | 2 mm | 0.5 – 5 |
| Lighter sleeve radial offset from shroud edge | 0 mm | -5 – 10 |
| Downstem outer diameter | 12 mm | 8 – 20 |
| Downstem wall thickness | 2 mm | 0.5 – 4 |
| Downstem length | 90 mm | 40 – 150 |
| Downstem protrusion above lid | 10 mm | 0 – 30 |
| Female joint taper length | 20 mm | 10 – 40 |
| Female joint top inner diameter | 14 mm | 10 – 20 |
| Downstem holder wall thickness | 2 mm | 0.5 – 5 |
| Bowl male joint OD | 14 mm | 10 – 20 |
| Bowl male joint length | 20 mm | 10 – 30 |
| Bowl outer diameter at cavity | 20 mm | 15 – 35 |
| Bowl overall length | 60 mm | 30 – 90 |
| Bowl tilt angle | 15 ° | 0 – 45 |
| Bowl wall thickness | 2 mm | 0.5 – 5 |
| Bowl bore diameter (air hole) | 5 mm | 2 – 8 |
| Mouthpiece body outer diameter | 30 mm | 20 – 50 |
| Mouthpiece height above lid | 50 mm | 30 – 80 |
| Mouthpiece bore diameter | 18 mm | 10 – 30 |
| Mouthpiece tube OD (below lid) | 20 mm | 10 – 30 |
| Mouthpiece tube length below lid | 30 mm | 5 – 60 |
| Mouthpiece position X | 0 mm | -35 – 35 |
| Mouthpiece position Y (negative side of lid) | -20 mm | -35 – 0 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent