Gears and transmission
GESTURE-UAV X-Quadcopter (Exploded Multi-Part)
- Bounding box
- 5450.0 × 140.0 × 92.5 mm
- Engine
- Precision B-rep
- Parameters
- 68
- Published
- November 1, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a complete, editable, parametric 3D CAD model of **GESTURE-UAV**, a custom X-configuration gesture-controlled quadcopter, compatible with Autodesk Fusion 360. ### Overall dimensions - Motor-to-motor diagonal: 400 mm (provisional). - Centre-to-motor distance: 200 mm. - Propeller diameter: 127 mm (5 inches). - Central body: 120 × 100 mm. - Four independent arms: 20 mm wide, 5 mm thick. - Central plates: 120 × 100 × 2 mm. - Plate separation: 35 mm. ### Components Include: - 2 × NXP FRDM-MCXA153 development boards. - 2 × 6-axis IMUs. - 2 × wireless modules. - 4 × brushless motors. - 4 × propellers. - 1 × 4-in-1 ESC. - 1 × LiPo battery. - 1 × voltage regulator. - Electronics enclosure, landing gear and propeller guards. ### FRDM-MCXA153 Create two separate board components: FLIGHT and GLOVE. Reproduce the actual PCB outline, thickness, mounting holes, USB-C connectors, headers and major components using official NXP design files. Never invent PCB dimensions or traces. Use a clearly labelled placeholder if exact data is unavailable. ### Mechanical design Include motor mounts, reinforced arms, removable electronics trays, M3 mounting holes, PCB standoffs, battery straps, ESC ventilation, wiring channels and vibration-isolated flight IMU mounting. Use editable parameters for all dimensions. Keep every component independently selectable. ### Engineering Assign realistic materials and mass properties. Calculate total mass, centre of gravity and three-axis moments of inertia. Check motor symmetry, propeller clearance, component collisions and mounting compatibility. Use manufacturer specifications wherever available. Clearly label estimated and provisional values. ### Deliverables Generate a complete assembled quadcopter, individual editable components, exploded view, orthographic views and STEP exports. Prioritise mechanical accuracy and practical manufacturability over visual appearance. Do not claim flightworthiness without engineering validation.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded Layout Gap | 280 mm | 120 – 500 |
| Frame Plate Length | 120 mm | 80 – 200 |
| Frame Plate Width | 100 mm | 60 – 160 |
| Frame Plate Thickness | 2 mm | 1 – 6 |
| Corner Hole Inset | 10 mm | 5 – 25 |
| Plate Separation / Standoff Length | 35 mm | 15 – 70 |
| Standoff Outer Diameter | 6 mm | 4 – 12 |
| M3 Clearance Hole Diameter | 3.2 mm | 2.5 – 5 |
| Battery Strap Slot Width | 10 mm | 4 – 20 |
| Battery Strap Slot Length | 60 mm | 20 – 90 |
| Wiring Pass-Through Diameter | 12 mm | 4 – 30 |
| Arm Length (Centre to Motor) | 200 mm | 120 – 260 |
| Arm Width | 20 mm | 12 – 30 |
| Arm Root Width (Reinforced) | 26 mm | 12 – 40 |
| Arm Thickness | 5 mm | 3 – 10 |
| Wiring Channel Start X | 40 mm | 10 – 120 |
| Wiring Channel Length | 100 mm | 20 – 160 |
| Wiring Channel Width | 4 mm | 2 – 10 |
| Motor Screw Pattern Spacing | 16 mm | 10 – 25 |
| Motor Bell Diameter | 28 mm | 16 – 40 |
| Motor Height | 30 mm | 15 – 45 |
| Motor Shaft Diameter | 3 mm | 2 – 6 |
| Motor Shaft Length | 12 mm | 4 – 25 |
| Motor Mount Plate Size | 30 mm | 20 – 45 |
| Motor Mount Thickness | 3 mm | 1.5 – 6 |
| Motor Mount Centre Bore | 10 mm | 4 – 18 |
| Propeller Diameter | 127 mm | 80 – 180 |
| Propeller Hub Diameter | 20 mm | 10 – 35 |
| Propeller Hub Height | 6 mm | 3 – 12 |
| Blade Chord Width | 8 mm | 4 – 16 |
| Blade Thickness | 2 mm | 1 – 5 |
| Propeller Centre Bore | 5 mm | 2 – 10 |
| 4-in-1 ESC Length | 45 mm | 25 – 70 |
| 4-in-1 ESC Width | 35 mm | 20 – 60 |
| 4-in-1 ESC Height | 10 mm | 4 – 22 |
| ESC Vent Slot Width | 3 mm | 1 – 8 |
| ESC Vent Slot Length | 22 mm | 8 – 32 |
| ESC Vent Slot Count | 4 mm | 2 – 8 |
| LiPo Battery Length | 100 mm | 60 – 150 |
| LiPo Battery Width | 35 mm | 20 – 60 |
| LiPo Battery Height | 25 mm | 12 – 45 |
| Battery Strap Length | 105 mm | 60 – 160 |
| Battery Strap Width | 10 mm | 5 – 25 |
| Battery Strap Thickness | 1.5 mm | 0.8 – 4 |
| Voltage Regulator Length | 30 mm | 15 – 60 |
| Voltage Regulator Width | 20 mm | 10 – 45 |
| Voltage Regulator Height | 8 mm | 3 – 20 |
| FRDM-MCXA153 PCB Length | 90 mm | 50 – 130 |
| FRDM-MCXA153 PCB Width | 60 mm | 35 – 100 |
| PCB Thickness | 1.6 mm | 0.8 – 3 |
| PCB Mounting Hole Inset | 8 mm | 4 – 20 |
| USB-C Keep-Out Width | 9 mm | 5 – 18 |
| USB-C Keep-Out Depth | 5 mm | 2 – 12 |
| IMU / Radio Module Length | 20 mm | 10 – 40 |
| IMU / Radio Module Width | 15 mm | 8 – 30 |
| IMU / Radio Module Thickness | 3 mm | 1 – 10 |
| Electronics Enclosure Length | 120 mm | 80 – 180 |
| Electronics Enclosure Width | 100 mm | 60 – 150 |
| Electronics Enclosure Height | 25 mm | 12 – 50 |
| Enclosure Wall Thickness | 4 mm | 2 – 10 |
| Enclosure Pocket Depth | 20 mm | 8 – 40 |
| Landing Leg Height | 80 mm | 40 – 140 |
| Landing Leg Diameter | 8 mm | 4 – 16 |
| Landing Foot Diameter | 20 mm | 10 – 35 |
| Landing Foot Thickness | 3 mm | 1.5 – 8 |
| Propeller Guard Outer Diameter | 140 mm | 100 – 200 |
| Propeller Guard Ring Height | 12 mm | 5 – 30 |
| Propeller Guard Radial Wall | 4 mm | 2 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled