Gears and transmission
Geared Hand Winch
- Bounding box
- 60 × 40 × 40 mm
- Engine
- 3D Printing B-rep
- Parameters
- 14
- Published
- November 4, 2026
Download
Free to download and use. See the terms.
The prompt
make a winch with an enclosure and hand crank featuring a gear reduction and slots for a rope to string into. make it 6x4x4
Parameters
| Name | Value | Range |
|---|---|---|
| Overall length X | 60 mm | 40 – 120 |
| Overall depth Y | 40 mm | 30 – 100 |
| Overall height Z | 40 mm | 25 – 80 |
| Wall thickness | 4 mm | 2 – 8 |
| Rope drum diameter | 14 mm | 8 – 30 |
| Rope drum length | 32 mm | 12 – 60 |
| Drum gear teeth | 20 mm | 12 – 40 |
| Crank pinion teeth | 10 mm | 6 – 20 |
| Gear module | 0.8 mm | 0.5 – 2 |
| Gear face width | 6 mm | 3 – 12 |
| Crank arm radius | 15 mm | 8 – 28 |
| Crank grip diameter | 8 mm | 5 – 16 |
| Rope slot width | 16 mm | 8 – 30 |
| Rope slot height | 12 mm | 4 – 25 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled