Gears and transmission
Gearbox Assembly 500x500
- Bounding box
- 600.0 × 560.0 × 383.4 mm
- Engine
- Precision B-rep
- Parameters
- 41
- Published
- October 10, 2026
Download
Free to download and use. See the terms.
The prompt
Give me gearbox drawing with 500 x 500 mm
Parameters
| Name | Value | Range |
|---|---|---|
| Housing Length | 500 mm | 200 – 1000 |
| Housing Width | 500 mm | 200 – 1000 |
| Housing Height | 350 mm | 150 – 600 |
| Wall Thickness | 15 mm | 5 – 30 |
| Bottom Thickness | 15 mm | 5 – 30 |
| Input Bearing Bore Dia | 60 mm | 30 – 100 |
| Output Bearing Bore Dia | 80 mm | 40 – 120 |
| Flange Width | 30 mm | 10 – 60 |
| Flange Thickness | 10 mm | 5 – 20 |
| Cover Thickness | 15 mm | 5 – 30 |
| Cover Bolt Hole Dia | 11 mm | 6 – 20 |
| Bolt Inset | 25 mm | 10 – 50 |
| Input Shaft Dia | 30 mm | 10 – 60 |
| Input Shaft Length | 320 mm | 100 – 600 |
| Input Keyway Width | 8 mm | 2 – 20 |
| Input Keyway Depth | 4 mm | 1 – 10 |
| Input Keyway Length | 40 mm | 10 – 100 |
| Output Shaft Dia | 50 mm | 20 – 100 |
| Output Shaft Length | 320 mm | 100 – 600 |
| Output Keyway Width | 14 mm | 3 – 30 |
| Output Keyway Depth | 6 mm | 2 – 15 |
| Output Keyway Length | 50 mm | 10 – 120 |
| Pinion Module | 5 mm | 1 – 10 |
| Pinion Teeth | 20 | 8 – 40 |
| Pinion Width | 40 mm | 10 – 100 |
| Gear Module | 5 mm | 1 – 10 |
| Gear Teeth | 60 | 20 – 120 |
| Gear Width | 50 mm | 10 – 100 |
| Input Bearing OD | 60 mm | 30 – 100 |
| Input Bearing ID | 30 mm | 10 – 60 |
| Input Bearing Width | 20 mm | 5 – 50 |
| Output Bearing OD | 80 mm | 40 – 120 |
| Output Bearing ID | 50 mm | 20 – 100 |
| Output Bearing Width | 25 mm | 5 – 50 |
| Bolt Diameter | 10 mm | 4 – 24 |
| Bolt Head Diameter | 17 mm | 6 – 36 |
| Bolt Head Height | 6.4 mm | 2 – 15 |
| Bolt Shank Length | 30 mm | 10 – 100 |
| Washer OD | 20 mm | 8 – 50 |
| Washer ID | 11 mm | 4 – 30 |
| Washer Thickness | 2 mm | 0.5 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled