Gears and transmission
Gearbox Assembly
- Bounding box
- 180.0 × 140.0 × 120.0 mm
- Engine
- Precision B-rep
- Parameters
- 43
- Published
- September 26, 2026
Download
Free to download and use. See the terms.
The prompt
design gearbox
Parameters
| Name | Value | Range |
|---|---|---|
| Gear Module | 1.5 mm | 0.5 – 3 |
| Gear Face Width | 15 mm | 5 – 30 |
| Input Shaft Height (Z) | 90 mm | 20 – 110 |
| Input Shaft Protrusion | 10 mm | 0 – 50 |
| Output Shaft Rear Protrusion | 20 mm | 0 – 60 |
| Input Pinion Y Position | 20 mm | -30 – 60 |
| Housing Length | 180 mm | 100 – 300 |
| Housing Width | 140 mm | 100 – 300 |
| Housing Height | 120 mm | 80 – 200 |
| Wall Thickness | 8 mm | 3 – 20 |
| Foot Length | 20 mm | 10 – 50 |
| Foot Width | 20 mm | 10 – 50 |
| Foot Height | 20 mm | 10 – 50 |
| Shaft Hole Clearance | 1 mm | 0.5 – 5 |
| Cover Thickness | 10 mm | 5 – 30 |
| Bolt Hole Diameter | 6 mm | 3 – 20 |
| Bolt Hole Count | 8 | 4 – 20 |
| Bolt Hole Offset from Edge | 10 mm | 5 – 30 |
| Input Shaft Diameter | 12 mm | 5 – 30 |
| Input Shaft Length | 80 mm | 50 – 200 |
| Input Keyway Width | 3 mm | 1 – 10 |
| Input Keyway Depth | 2 mm | 0.5 – 5 |
| Input Keyway Length | 20 mm | 5 – 50 |
| Input Keyway Offset from End | 5 mm | 0 – 20 |
| Input Pinion Teeth | 20 | 10 – 50 |
| Input Gear Bore | 12 mm | 5 – 30 |
| Intermediate Shaft Diameter | 20 mm | 10 – 40 |
| Intermediate Shaft Length | 120 mm | 50 – 250 |
| Intermediate Large Gear Teeth | 48 | 20 – 80 |
| Intermediate Gear Bore | 20 mm | 10 – 40 |
| Intermediate Pinion Teeth | 22 | 10 – 50 |
| Output Shaft Diameter | 20 mm | 10 – 40 |
| Output Shaft Length | 140 mm | 60 – 300 |
| Output Keyway Width | 5 mm | 1 – 10 |
| Output Keyway Depth | 3 mm | 0.5 – 8 |
| Output Keyway Length | 25 mm | 5 – 60 |
| Output Keyway Offset from End | 5 mm | 0 – 20 |
| Output Gear Teeth | 55 | 20 – 100 |
| Output Gear Bore | 20 mm | 10 – 40 |
| Bearing Outer Diameter | 42 mm | 20 – 80 |
| Bearing Bore (Input) | 12 mm | 5 – 30 |
| Bearing Bore (Others) | 20 mm | 10 – 50 |
| Bearing Thickness | 12 mm | 5 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled