Brackets and mounts
GBA-SP Style Folding Fidget Toy (8-part exploded kit)
- Bounding box
- 474.0 × 90.0 × 14.0 mm
- Engine
- Precision B-rep
- Parameters
- 41
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Create a fully functional, 3D-printable folding handheld fidget toy inspired by the Nintendo Game Boy Advance SP. **Overall design:** - Retro Game Boy Advance SP shape with rounded corners, realistic thickness, and detailed geometry. - Approximately 90 mm wide and 85 mm tall when closed. - Two separate main pieces: an upper screen lid and a lower keyboard/button body. - The upper lid should have a recessed, completely blank screen so I can customize it later. - The lower body should have raised A and B buttons and a plus-shaped directional D-pad. **Functional mechanical clickers:** - The A and B buttons must be real, physically pressable clickers, not decorative raised shapes. - Create cavities and mounting supports underneath the buttons for mechanical keyboard switches. - The plus-shaped directional D-pad must also function as a physical clicking fidget, with clickable up, down, left, and right directions. - Create separate removable button caps for assembly and customization. - Include appropriate clearance so each button moves freely without sticking. **Separate snap-fit hinge:** - DO NOT create a print-in-place hinge or a permanently connected model. - Print the upper screen lid and lower button body as two completely separate pieces. - Design an integrated snap-fit pivot hinge with rounded hinge pins on one piece and flexible C-shaped hinge clips on the other. - After printing, I should be able to push the two halves together until the hinge snaps into place. - Once assembled, the device must open and close like a real Game Boy Advance SP. - The hinge should hold the pieces together securely while allowing smooth rotation. - Design the hinge for repeated use with suitable FDM printing tolerances. **Assembly and printing:** - Make every component separately printable and exportable as an STL. - Include the top lid, bottom housing, removable buttons, and any required switch-mounting or access components. - Design for a Bambu Lab P1S with a 0.4 mm nozzle. - Use approximately 0.25–0.35 mm starting clearance between moving or snap-fit parts, adjusting for the printer and material. - Use realistic wall thicknesses and avoid fragile hinge clips. - Make the design suitable for multicolor printing. This must be a functional, assemble-after-print fidget toy with actual clickable buttons and a working folding hinge, not a solid decorative model. Show the assembled model open and closed, as well as an exploded view displaying every separately printable part.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded Layout Gap | 10 mm | 2 – 50 |
| Lid Width | 90 mm | 60 – 140 |
| Lid Height (Depth) | 85 mm | 60 – 140 |
| Lid Thickness | 8 mm | 3 – 16 |
| Lid Corner Radius | 6 mm | 1 – 15 |
| Screen Pocket Width | 62 mm | 20 – 100 |
| Screen Pocket Height | 46 mm | 20 – 100 |
| Screen Pocket Depth | 1.2 mm | 0.4 – 4 |
| Screen Offset Y | 6 mm | -30 – 30 |
| Hinge Pin Diameter | 3 mm | 1.5 – 8 |
| Running Clearance | 0.3 mm | 0.1 – 1 |
| Body Width | 90 mm | 60 – 140 |
| Body Height (Depth) | 85 mm | 60 – 140 |
| Body Thickness | 11 mm | 6 – 25 |
| Body Corner Radius | 6 mm | 1 – 15 |
| Side Wall Thickness | 2 mm | 1 – 4 |
| Top Wall Thickness | 2.6 mm | 1 – 6 |
| Button Cap Diameter | 13.5 mm | 8 – 25 |
| Button Cap Height | 4.5 mm | 2 – 10 |
| Switch Stem Diameter | 3.2 mm | 2 – 6 |
| Stem Length | 6 mm | 2 – 14 |
| Retention Lip Diameter | 5.5 mm | 3 – 12 |
| Retention Lip Height | 0.9 mm | 0.4 – 3 |
| D-pad Overall Size | 23 mm | 14 – 40 |
| D-pad Arm Width | 8 mm | 4 – 16 |
| D-pad Height | 3.5 mm | 2 – 8 |
| Center Pivot Boss Diameter | 4 mm | 2 – 10 |
| Center Pivot Boss Height | 2 mm | 0.5 – 5 |
| Press Pad Diameter | 2.5 mm | 1 – 6 |
| Switch Plate Width | 52 mm | 30 – 80 |
| Switch Plate Depth | 26 mm | 16 – 50 |
| Switch Plate Thickness | 4 mm | 2 – 8 |
| MX Switch Cutout Size | 14 mm | 10 – 20 |
| Carrier Size | 38 mm | 20 – 60 |
| Carrier Thickness | 6 mm | 3 – 12 |
| Pivot Socket Diameter | 4 mm | 2 – 8 |
| Switch Pocket Radius | 8 mm | 4 – 15 |
| Switch Pocket Diameter | 5 mm | 2 – 10 |
| Access Cover Width | 84 mm | 50 – 130 |
| Access Cover Depth | 78 mm | 50 – 130 |
| Access Cover Thickness | 2.5 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con
Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Flat-Strap Reel Spool
Create a 3D model of a custom flat-strap reel spool for a home plate housing cavity. Geometry: - A reel spool consisting of two parallel circular outer flanges connected by a cent
PET Recycling Kiosk Frame
Design a production-ready welded steel frame for an outdoor PET bottle recycling and animal feeding kiosk. Create ONLY the steel frame. Do not create covers, motors, tanks, electr
Hydraulic Wing and Flaperon Demonstrator
Create a parametric 3D CAD model of a hydraulic aircraft wing and movable flaperon based on the reference sketch. **Wing dimensions:** - 240 mm chord, 120 mm span, 48 mm thickness
JZX100 Gas Cap Holder
can you make a gas cap holder for a jzx100 chaser. i want you to refer to the image and make a cad very close to the picture
