Gears and transmission
Garlic Cutting Machine Assembly
- Bounding box
- 8208.3 × 850.0 × 1460.0 mm
- Engine
- Precision B-rep
- Parameters
- 36
- Published
- August 10, 2026
Download
Free to download and use. See the terms.
The prompt
Create a realistic, manufacturable **3D CAD assembly of an Automatic Garlic Root and Stem Cutting Machine** for agricultural post-harvest processing. **Overall size:** 2100 × 800 × 1300 mm **Frame:** MS 40×40×2 mm square tube with adjustable leveling feet. ### Main Components 1. **SS304 Feeding Hopper** – 600×500 mm top, 300×250 mm bottom, 400 mm high, 1.5 mm sheet. 2. **Two Rubber Feeding Rollers** – Ø70×300 mm, Ø20 mm shafts, 8 mm food-grade rubber coating, opposite rotation, adjustable 10–20 mm gap. 3. **Roller Drive** – 0.5 HP geared motor, sprockets, chain, tensioner and complete safety guard. 4. **Inclined Conveyor** – 300 mm wide, 1000 mm long, 30–35° inclination, food-grade PU belt with soft pockets. 5. **Alignment Unit** – adjustable soft rubber rollers and guide plates to hold and orient garlic. 6. **Cutting Station** – enclosed SS304 safety housing with: * Lower Ø120×3 mm SS420 root-cutting blade * Upper Ø120×3 mm SS420 stem-cutting blade * Adjustable cutting height and controlled blade clearance. 7. **Cutting Drives** – separate ~0.5 HP motors, shafts, bearings, couplings and guarded belt/chain drives. 8. **Waste System** – separate gravity chute and removable stainless-steel waste tray. 9. **Sorting Conveyor/Table** – horizontal food-grade conveyor with three sections: **Small / Medium / Large garlic**, using interchangeable mesh screens. 10. **Collection Trays** – three SS304 removable trays. ### Mechanical Requirements Show realistic: * Shafts and pillow-block bearings * Bearing plates * Fasteners and welded joints * Slotted adjustment mechanisms * M8 adjustment screws and locking bolts * Motor mounting plates * Belt/chain tensioning * Guards for all rotating parts * Emergency-stop button * Maintenance access panels ### Required CAD Views Generate: * Isometric assembly * Front, rear, left, right, top and bottom views * Exploded assembly * Section A-A through hopper and feeding rollers * Section B-B through cutting station * Detailed roller assembly * Detailed blade assembly * Motor-drive detail Include **metric manufacturing dimensions, material specifications, BOM with quantity and estimated mass**, and clearly mark dimensions requiring physical testing/validation. Design it as a **practical fabrication-ready machine**, not a futuristic or decorative concept.
Parameters
| Name | Value | Range |
|---|---|---|
| Layout Gap | 600 mm | 300 – 1000 |
| Frame Length | 2100 mm | 1500 – 3000 |
| Frame Width | 800 mm | 500 – 1200 |
| Frame Height | 1300 mm | 1000 – 1800 |
| Tube Side | 40 mm | 20 – 60 |
| Tube Wall Thickness | 2 mm | 1 – 5 |
| Hopper Top Length | 600 mm | 400 – 800 |
| Hopper Top Width | 500 mm | 300 – 700 |
| Hopper Bottom Length | 300 mm | 200 – 400 |
| Hopper Bottom Width | 250 mm | 150 – 350 |
| Hopper Height | 400 mm | 200 – 600 |
| Hopper Sheet Thickness | 1.5 mm | 0.5 – 3 |
| Roller Diameter | 70 mm | 40 – 100 |
| Roller Length | 300 mm | 200 – 500 |
| Roller Shaft Diameter | 20 mm | 10 – 30 |
| Roller Gap | 15 mm | 10 – 20 |
| Conveyor Belt Width | 300 mm | 200 – 500 |
| Conveyor Belt Length | 1000 mm | 800 – 1500 |
| Inclination Angle | 32.5 deg | 20 – 45 |
| Alignment Roller Dia | 20 mm | 10 – 50 |
| Alignment Guide Width | 300 mm | 200 – 400 |
| Cutting Housing Length | 600 mm | 400 – 800 |
| Cutting Housing Width | 500 mm | 300 – 600 |
| Cutting Housing Height | 500 mm | 300 – 700 |
| Blade Diameter | 120 mm | 80 – 200 |
| Blade Thickness | 3 mm | 1 – 6 |
| Blade Shaft Diameter | 25 mm | 15 – 40 |
| Blade Shaft Length | 350 mm | 200 – 500 |
| Waste Tray Length | 400 mm | 300 – 500 |
| Waste Tray Width | 300 mm | 200 – 400 |
| Waste Tray Height | 200 mm | 100 – 300 |
| Sorting Conveyor Length | 1000 mm | 600 – 1500 |
| Sorting Conveyor Width | 400 mm | 200 – 600 |
| Collection Tray Length | 400 mm | 200 – 500 |
| Collection Tray Width | 300 mm | 200 – 400 |
| Collection Tray Height | 150 mm | 100 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a