Gears and transmission
Gantry Plate
- Bounding box
- 60 × 80 × 5 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- October 30, 2026
Download
Free to download and use. See the terms.
The prompt
A flat rectangular gantry plate, 60mm wide, 80mm long, and 5mm thick. Create four 5mm diameter through-holes for mounting wheels, positioned in a rectangular pattern 40mm apart in the width direction and 60mm apart in the length direction, centered on the plate. Add a central rectangular cutout 20mm wide and 30mm long in the middle of the plate. Add two 3mm diameter through-holes near the top edge, spaced 10mm apart, for attaching a timing belt.
Parameters
| Name | Value | Range |
|---|---|---|
| Width | 60 mm | 20 – 200 |
| Length | 80 mm | 20 – 200 |
| Thickness | 5 mm | 2 – 20 |
| Wheel mounting hole diameter | 5 mm | 3 – 12 |
| Wheel hole spacing across width | 40 mm | 10 – 180 |
| Wheel hole spacing along length | 60 mm | 10 – 180 |
| Central cutout width | 20 mm | 5 – 150 |
| Central cutout length | 30 mm | 5 – 150 |
| Timing belt hole diameter | 3 mm | 2 – 8 |
| Belt hole spacing | 10 mm | 4 – 40 |
| Belt hole offset from top edge | 8 mm | 4 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Two-Stage Spur Gear Reduction Assembly
Design a 2-stage spur gear reduction set for 3D printing with an overall 10:1 ratio. Stage 1: A 12-tooth pinion driving a 36-tooth gear (3:1). Stage 2: A 12-tooth pinion coupled