Everything else
Ganesha Elephant Pendant
- Bounding box
- 44.0 × 52.0 × 5.8 mm
- Engine
- Precision B-rep
- Parameters
- 32
- Published
- October 15, 2026
Download
Free to download and use. See the terms.
The prompt
Make me a pendant set using 2.5mm round stone and 3mm round stone total stone count in pendant should be 28 Using a ganpthi sitting and 2 small elephants it should be more clear and design should be acooped fully
Parameters
| Name | Value | Range |
|---|---|---|
| Pendant Width | 44 mm | 20 – 80 |
| Pendant Height | 52 mm | 30 – 90 |
| Base Thickness | 2.5 mm | 1 – 6 |
| Corner Radius | 4 mm | 0.5 – 10 |
| Border Width | 4.5 mm | 2 – 8 |
| Motif Relief Depth | 1.8 mm | 0.5 – 5 |
| Motif Overlap into Base | 0.5 mm | 0.1 – 1.5 |
| Bottom Offset for Motifs | 5 mm | 0 – 15 |
| Ganesha Body Width | 12 mm | 4 – 25 |
| Ganesha Body Height | 10 mm | 4 – 25 |
| Ganesha Head Diameter | 8 mm | 3 – 15 |
| Ganesha Ear Diameter | 3 mm | 1 – 8 |
| Ganesha Head Overlap | 1.5 mm | 0 – 5 |
| Ganesha Ear Overlap | 0.8 mm | 0 – 3 |
| Ganesha Trunk Width | 2.5 mm | 1 – 6 |
| Ganesha Trunk Height | 8 mm | 2 – 15 |
| Gap Between Ganesha & Elephants | 2 mm | 0.5 – 8 |
| Elephant Body Width | 6 mm | 2 – 15 |
| Elephant Body Height | 8 mm | 2 – 15 |
| Elephant Head Diameter | 4 mm | 2 – 10 |
| Elephant Head Overlap | 1 mm | 0 – 4 |
| Elephant Trunk Width | 2 mm | 1 – 5 |
| Elephant Trunk Height | 5 mm | 2 – 12 |
| 2.5 mm Stone Count | 14 count | 0 – 28 |
| 3 mm Stone Count | 14 count | 0 – 28 |
| 2.5 mm Stone Diameter | 2.5 mm | 1 – 5 |
| 3 mm Stone Diameter | 3 mm | 1 – 6 |
| Stone Hole Clearance | 0.1 mm | 0 – 0.5 |
| Bail Outer Diameter | 4 mm | 2 – 8 |
| Bail Inner Diameter | 2 mm | 0.5 – 6 |
| Bail Thickness | 1.5 mm | 0.5 – 4 |
| Bail Overlap into Base | 1 mm | 0.2 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm