Galaxy S24 FE Bumper Case

1 views

Bounding box: 84.3 × 169 × 10.0 mm
Engine: 3D Printing B-rep
Parameters: 26
Published: November 14, 2026

Download

Free to download and use. See the terms.

The prompt

Samsung s24 fe çerçevesiz kılıf

Parameters

Name	Value	Range
Phone width	77.3 mm	60 – 100
Phone height	162 mm	120 – 200
Phone thickness	8 mm	5 – 14
Phone corner radius	9.5 mm	2 – 20
Side clearance per side	0.3 mm	0.1 – 0.6
Wall thickness	2.2 mm	1.2 – 5
Screen-side lip depth	1.2 mm	0.6 – 3
Screen-side lip thickness	1.2 mm	0.6 – 3
Back-side lip depth	0.9 mm	0.4 – 3
Back-side lip thickness	0.8 mm	0.4 – 3
Corner bumper bulge	1 mm	0 – 4
Outer edge chamfer	0.8 mm	0 – 2
USB-C slot width	12 mm	8 – 20
USB-C slot height	4 mm	2.4 – 8
USB-C centre above back face	3.9 mm	1.5 – 7
Volume rocker slot length	26 mm	10 – 40
Volume rocker centre from bottom	88 mm	40 – 150
Power key slot length	14 mm	8 – 30
Power key centre from bottom	66 mm	30 – 140
Speaker slot width	18 mm	6 – 30
Speaker slot height	2.2 mm	1.2 – 5
Speaker slot offset from centre	20 mm	8 – 34
SIM tray slot width	13 mm	8 – 20
SIM tray slot height	2.6 mm	1.5 – 5
SIM slot offset from centre	16 mm	8 – 32
Microphone hole diameter	2.4 mm	1.5 – 4

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

More models

Browse the full gallery →

600.0 × 400.0 × 450.0 mmPrecision

Table

Make a table of height 45 cm

STEPSTLGLB5 PARAMS

700.6 × 2000.6 × 2000.0 mmPrecision

Haul‑off Reel

Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like

STEPSTLGLB6 PARAMS

664.7 × 664.7 × 1380.1 mmPrecision

旋转式卷烟陈列架

物件名称：旋转式卷烟陈列架（带语音播报）整体形态：一个圆柱形、可360度旋转的立式展示架。整体高度为1380mm，直径为600mm。底部配有4个带刹车的万向轮，方便移动和固定。结构分层（从下往上）：底座（0-200mm高度）：底部为圆柱形底座，高200mm。外层采用网格状设计（类似金属网孔或菱形网格）。底座内部中空，用于内置音箱设备。

STEPSTLGLB24 PARAMS