Everything else
Gabled Roof Steel Frame with Hoist Rails
- Bounding box
- 97.8 × 104.0 × 192.0 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- September 18, 2026
Download
Free to download and use. See the terms.
The prompt
System Instruction: Import/continue the previous assembly model. Maintain all distinct bodies.Task: Model the gabled roof structure.Dimensions: Model a gabled roof structure rising to a center ridge peak height of 192 inches from the ground. Use 2-inch square tubing for the roof trusses.Hoist Rails: In the truss/attic region, position two longitudinal steel I-beam bodies acting as hoist rails. Space them precisely to divide the remaining inner attic opening evenly into three longitudinal channels. The I-beams must remain independent, un-fused bodies. No windows anywhere in the design.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width (X) | 96 in | 24 – 240 |
| Overall Length (Y) | 96 in | 24 – 240 |
| Wall Height | 96 in | 48 – 240 |
| Square Tube Size | 2 in | 1 – 6 |
| Tube Wall Thickness | 0.13 in | 0.05 – 0.5 |
| Door Opening Width | 36 in | 12 – 120 |
| Door Opening Height | 80 in | 24 – 120 |
| Door Offset from Front | 6 in | 0 – 60 |
| Panel Gap Between Bays | 6 in | 0 – 60 |
| Ridge Peak Height (from ground) | 192 in | 120 – 360 |
| Number of Roof Trusses | 5 pcs | 2 – 12 |
| Hoist Rail Top Height | 144 in | 100 – 155 |
| I-Beam Depth | 8 in | 2 – 16 |
| I-Beam Flange Width | 4 in | 2 – 12 |
| I-Beam Web Thickness | 0.25 in | 0.1 – 1 |
| I-Beam Flange Thickness | 0.4 in | 0.1 – 1.5 |
| Bolt Tab Thickness | 0.25 in | 0.06 – 1 |
| Bolt Tab Width | 2 in | 0.5 – 6 |
| Bolt Tab Length | 6 in | 2 – 24 |
| Bolt Tab End Margin | 6 in | 0 – 36 |
| Vertical Tabs per Run | 3 pcs | 1 – 10 |
| Horizontal Tabs per Run | 3 pcs | 1 – 10 |
| Mesh Shelf Width | 24 in | 6 – 60 |
| Mesh Shelf Thickness | 0.25 in | 0.06 – 1 |
| Mesh Grid Spacing | 4 in | 1 – 12 |
| Mesh Bar Width | 0.5 in | 0.1 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Three-Phase Asynchronous Motor 7.5 kW
moteur asynchome triphasé 7.5kw 1500tr/mn
Bánh răng trụ thẳng Ø14 – lỗ Ø6.5
Tạo cho tôi 1 bánh răng đường kính 14 lỗ 6.5mm