Everything else
FWS 60 Curtain Wall in Concrete Opening
- Bounding box
- 4500 × 290 × 3650 mm
- Engine
- 3D Printing B-rep
- Parameters
- 28
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Konstruktionsauftrag 3D-Baugruppe: Erstelle ein parametrisches 3D-Modell einer Pfosten-Riegel-Fassade nach Schüco FWS 60 (Ansichtsbreite 60 mm, Pfostentiefe 150 mm, Riegeltiefe 155 mm) mit integriertem Dreh-Kipp-Einsatzelement nach Schüco AWS 60 (Bautiefe 60/70 mm). Die Fassade sitzt in einer vierseitig geschlossenen Stahlbetonöffnung (4'000 × 3'200 mm) mit einer umlaufenden Baukörper-Anschlussfuge von 20 mm. Modelliere alle Baukörperanschlüsse nach Schüco-Detailkatalog und SIA 331: Unten mit Edelstahl-Fussplatten (Langlöcher), Schwerlastankern M12, EPDM-Dichtungsbahn und gekanteter Alu-Fensterbank (5° Gefälle); oben mit gleitendem Kopfanschluss (±15 mm Bewegungsaufnahme) und Alu-Sturzblende; seitlich mit justierbaren Wandanschlusswinkeln und Alu-Laibungsblenden. Integriere durchgehend die 3-Ebenen-Abdichtung (innere Dampfsperrfolie, mittige Mineralwolldämmung, äussere diffusionsoffene EPDM-Folie/Kompriband) sowie 3-fach Isolierverglasung (48 mm Gesamtdicke) mit Isolatoren, Andruckprofilen und Deckschalen.
Parameters
| Name | Value | Range |
|---|---|---|
| Opening width | 4000 mm | 2000 – 6000 |
| Opening height | 3200 mm | 1500 – 4000 |
| Opening depth | 200 mm | 100 – 400 |
| Perimeter joint gap | 20 mm | 10 – 40 |
| Concrete surround thickness | 250 mm | 100 – 600 |
| Floor slab thickness | 200 mm | 50 – 400 |
| Mullion face width | 60 mm | 30 – 120 |
| Mullion depth | 150 mm | 60 – 250 |
| Transom face height | 60 mm | 30 – 120 |
| Transom depth | 155 mm | 60 – 250 |
| Facade columns | 3 mm | 1 – 5 |
| Facade rows | 2 mm | 1 – 4 |
| Triple IG unit thickness | 48 mm | 24 – 60 |
| Glass overlap into frame | 10 mm | 3 – 25 |
| Cover cap width | 30 mm | 10 – 60 |
| Cover cap thickness | 12 mm | 4 – 30 |
| Outer frame profile width | 50 mm | 30 – 90 |
| Sash profile width | 45 mm | 25 – 90 |
| Construction depth | 70 mm | 50 – 120 |
| Element overlap into facade | 1 mm | 0 – 3 |
| Foot plate width | 100 mm | 60 – 200 |
| Foot plate depth | 200 mm | 100 – 300 |
| Foot plate thickness | 10 mm | 6 – 20 |
| Anchor diameter | 12 mm | 8 – 24 |
| Sill projection | 100 mm | 60 – 200 |
| Sill slope | 5 deg | 0 – 15 |
| Head flashing coverage | 120 mm | 60 – 250 |
| Reveal cover plate thickness | 6 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
旋转式卷烟陈列架
物件名称: 旋转式卷烟陈列架(带语音播报) 整体形态: 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm,直径为600mm。 底部配有4个带刹车的万向轮,方便移动和固定。 结构分层(从下往上): 底座(0-200mm高度): 底部为圆柱形底座,高200mm。 外层采用网格状设计(类似金属网孔或菱形网格)。 底座内部中空,用于内置音箱设备。
Deck with U-Shape and Stairs
ARE THOSE ALL THE SAME DEMETNIONS THT I GAVE YOU IN THE FIRST MESSAGE
Rounded Rectangular Tray
tôi muốn tạo một khay hình chữ nhật dài khoảng 40x30cm, có gờ của các thành cao lên 4cm, đế dày 2cm và 4 góc được bo tròn
DC 24V DALI SLIM LED Sürücü Gövdesi (360 mm)
BU REFERANSA GÖRE REVİZE ET
